2010 Ford Fusion

Issue: 
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. 

Safety Risk: 
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. 

Corrective Action: 
Ford will notify owners by mail. The corrective actions for this recall are under development. 
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Issue: 
On certain cars, a problem with the hydraulic control unit for the anti-lock brake system (ABS) could cause increased brake pedal travel. 
 
Safety Risk: 
Increased brake pedal travel could increase the risk of a crash.
 
Corrective Actions: 
The company will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to inspect the ABS module assembly. The system will be flushed with DOT 4 brake fluid, and if necessary, the hydraulic control unit will be replaced. Dealers will also replace the DOT 3 reservoir cap with a new DOT 4 cap.

Issue: 
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. 
 
Safety Risk: 
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. 

Corrective Actions: 
Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator replaced. 
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Additional note: This recall supersedes recalls 2016-347 (Ford Safety Improvement Program 16S26), 2017-024 (Ford Recall 17S01) and 2018-035 (Ford Recall 18S01). Vehicles repaired under the previous recalls do not require repair under this recall.

Ford Canada is conducting a voluntary Safety Improvement Program involving passenger airbag inflators in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States equipped with Takata airbags. Ford will replace the driver or passenger inflator on affected vehicles, depending on the vehicle involved. Owners who believe their vehicles may have been originally purchased or registered in the states of New Jersey, Delaware, District of Columbia, Maryland, Pennsylvania, Ohio, Indiana, Illinois, Virginia, West Virginia, Kentucky, Missouri, Nebraska, Kansas, Oklahoma, Arkansas, Tennessee, North Carolina, Nevada, Arizona, New Mexico, California, Texas, Louisiana, Mississippi, Alabama, Georgia, South Carolina, Florida, Hawaii, Puerto Rico or the U.S. Virgin Islands should contact a Ford dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Program is superseded by recall 2019005 (Ford Recall 19S01). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019005">recall 2019005</a> for more information.

On certain vehicles equipped with Canister Purge Valves (CPV's), the valve may not operate properly.  This could result in pressure changes inside the  fuel tank which may result in a fatigue crack in the upper surface of the metal fuel tank, resulting in seepage of fuel, or fuel vapor. Fuel leakage, in the presence of an ignition source, could lead to a fire causing injury and/or property damage.  Correction: Dealers will inspect the canister purge valve and tank.