Ford Focus Electric

Issue:
On certain vehicles, the engine oil pump tensioner and/or the engine oil pump drive belt could fail and cause a loss of engine oil pressure. If this happens, the engine could fail and cause a loss of power to the wheels and a loss of power braking assist.
Note: This recall only affects vehicles equipped with a 1.0L engine.

Safety Risk:
A sudden loss of power to the wheels could increase the risk of a crash. A loss of power brakes can cause an increase in brake pedal force and lead to an increase in stopping distance.

Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the oil pump drive belt tensioner assembly. The dealer will also replace the oil pump drive belt.

Issue: 
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. 
Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. 

Safety Risk: 
Glass that breaks in to large pieces could create a risk of injury. 
 
Corrective Actions: 
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

Issue: 
On certain vehicles repaired under recall 2018-577 (Ford Recall #18S32), the software for the Powertrain Control Module (PCM) was not properly updated. As a result, a second repair is required. The software allows the PCM to detect a Canister Purge Valve (CPV) that is not working properly. A CPV that is not working properly could cause a malfunction indicator light (MIL) to turn on in the instrument cluster, erratic readings on the fuel gauge, and/or the engine may stall.
Note: Owners are advised to keep their fuel level above half-full until the recall repairs are completed. 

Safety Risk: 
A sudden loss of engine power could increase the risk of a crash.

Corrective Actions: 
Ford will notify owners by mail and instruct them to take their vehicle to a dealer to update the Powertrain Control Module (PCM) software.

On certain vehicles equipped with a 1.0 L GTDI engine and 6-speed manual transmission, repeated high energy clutch slip can lead to premature clutch lining wear, reducing the mechanical properties of pressure plate material. Prolonged use, with a slipping clutch, could result in pressure plate fracture, which could cause breach of the clutch cover and transmission housing, potentially leading to a transmission fluid leak.  A transmission fluid leak, in the presence of an ignition source, could increase the risk of a fire. Correction: Dealers will evaluate the clutch for wear and replace as needed and will install updated software that will detect and prevent prolonged clutch slip. Note: This is an expansion of recall 2018-129.

On certain vehicles, the Canister Purge Valve (CPV) may stick open and cause excessive vacuum in the fuel system that could deform the fuel tank. If this were to occur, it could cause: a malfunction indicator light (MIL) to illuminate, erratic readings on the fuel gauge, and/or the engine may stall. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the Powertrain Control Module (PCM) with new software and replace the CPV as necessary. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. Note: In the interim, owners are advised to maintain at least 1/2 tank of fuel until the recall repair is performed.