2011 BMW X5 - Prices, Trims, Options, Specs, Photos, Reviews, Deals | autoTRADER.ca

2011 BMW X5

Canadian MSRP

$59,990 - $74,300

Owner Score
2011 BMW X5

Key Specifications for 2011 BMW X5

Fuel Economy 7.6 - 15.2 City/HWY combined
Horsepower 265 - 400 hp
Drivetrain All Wheel Drive
Engine FuelSystemGasoline, FuelSystemDiesel
Torque 300 - 450 ft-lb
Seats 5 - 7
 

Trim Comparison

Standard Not Available Optional
AWD 4dr 35i
AWD 4dr 35d
AWD 4dr 50i
AWD 4dr 35i
AWD 4dr 35d
AWD 4dr 50i
 
MSRP
59,990
MSRP
62,800
MSRP
74,300
 
 
Gas I6
Diesel I6
Gas V8
 
 
3.0L/182
3.0L/183
4.4L/268
 
 
Direct Injection
Direct Injection
Direct Injection
 
 
300 hp @ 5800-6250 rpm
265 hp @ 4200 rpm
400 hp @ 5500-6400 rpm
 
 
300 ft-lb @ 1200-5000 rpm
425 ft-lb @ 1750-2250 rpm
450 ft-lb @ 1750-4500 rpm
 
 
Power Steering
Power Steering
Power Steering
 
 
All Wheel Drive
All Wheel Drive
All Wheel Drive
 
 
8-speed Steptronic automatic transmission w/OD
6-speed Steptronic automatic transmission w/OD
8-speed Steptronic automatic transmission w/OD
 
 
Gasoline
Diesel
Gasoline
 
 
13.0 L/100 km
10.9 L/100 km
15.2 L/100 km
 
 
8.5 L/100 km
7.6 L/100 km
9.8 L/100 km
 
 
8.5 - 13.0 L/100 km
7.6 - 10.9 L/100 km
9.8 - 15.2 L/100 km
 
 
85.0 L
85.0 L
85.0 L
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4 Wheel Disc
4 Wheel Disc
4 Wheel Disc
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
5 - 7 N/A
5 - 7 N/A
5 - 7 N/A
 
 
998 mm
998 mm
998 mm
 
 
1016 mm
1016 mm
1016 mm
 
 
1524 mm
1524 mm
1524 mm
 
 
991 mm
991 mm
991 mm
 
 
930 mm
930 mm
930 mm
 
 
1473 mm
1473 mm
1473 mm
 
 
N/A
N/A
N/A
 
 
N/A
N/A
N/A
 
 
N/A
N/A
N/A
 
 
N/A
N/A
N/A
 
 
2129 L
2129 L
2129 L
 
 
524 - 657 L
524 - 657 L
524 - 657 L
 
 
201 L
201 L
201 L
 
 
 
 
 
 
2934 mm
2934 mm
2934 mm
 
 
4856 mm
4856 mm
4856 mm
 
 
1933 mm
1933 mm
1933 mm
 
 
1765 mm
1765 mm
1765 mm
 
 
N/A
N/A
N/A
 
 
2250 kg
2355 kg
2440 kg
 
 
P275/40R20 P255/50R19 P255/55R18
P275/40R20 P255/50R19 P255/55R18
P275/40R20 P255/50R19 P255/55R18
 
 
P315/35R20 P285/45R19 P255/55R18
P315/35R20 P285/45R19 255/50R19 P255/55R18
P315/35R20 P285/45R19 P255/55R18
 
 
 
 
 
 
 
 
 
 
 
 

Photos

autoTRADER Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Owner Scores

Based on 7 reviews
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 9
90% Complete
Interior Design 9
90% Complete
Exterior Styling 9
90% Complete
Reliability 9
90% Complete

Owner Reviews

Hakima Amazing piece of machinery November 12, 2014 Executive Sport Premium
Overall Score
It's the most amazing vehicle I've driven very sad to sell it for business reasons. So good on mileage its your money's worth.
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 10
100% Complete
Interior Design 8
80% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete
View all owner reviews

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2010177
Recall date
2010-06-01
System affected
Label
Model year(s) affected
2011
Manufacturer Recall Number:
Units Affected:
13
Notification Type:
Compliance Mfr
Certain vehicles equipped with 20 inch wheels & tires may have incorect information listed on the tire information label. The label may erroniously state that the vehicle is equipped with 19 inch wheels & tires. Correction: BMW will provide new labels to owners.
Recall number
2011237
Recall date
2011-06-23
System affected
Engine
Model year(s) affected
2011
Manufacturer Recall Number:
Units Affected:
238
Notification Type:
Safety Mfr
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt tensioner may have been manufactured incorrectly and could fail. This could cause a loss of steering power assist, which may result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the belt tensioner.
Recall number
2011376
Recall date
2011-10-21
System affected
Electrical
Model year(s) affected
2010 2011 2012
Manufacturer Recall Number:
Units Affected:
3,143
Notification Type:
Safety Mfr
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied.
Recall number
2012129
Recall date
2012-04-12
System affected
Label
Model year(s) affected
2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
Units Affected:
67,771
Notification Type:
Inconsequential
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
Recall number
2012396
Recall date
2012-11-26
System affected
Steering
Model year(s) affected
2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
5,542
Notification Type:
Safety TC
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. As such, the belt may become detached, resulting in a sudden loss of steering power assist. A vehicle experiencing a loss of steering power assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. This could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the idler pulley bolt and tighten with a revised torque procedure. A thread locking compound will be applied to the replacement bolt.
Recall number
2014127
Recall date
2014-04-10
System affected
Engine
Model year(s) affected
2010 2011 2012
Manufacturer Recall Number:
Units Affected:
20,022
Notification Type:
Safety Mfr
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. This could increase the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace affected bolts.
Recall number
2016142
Recall date
2016-03-31
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
Units Affected:
104,151
Notification Type:
Recalls Audit
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.
Recall number
2016226
Recall date
2016-05-13
System affected
Powertrain
Model year(s) affected
2011
Manufacturer Recall Number:
Units Affected:
3,331
Notification Type:
Safety Mfr
Certain vehicles may have been manufactured with defective front driveshaft universal joint seals, which could allow water and/or dirt to enter the universal joint, causing accelerated wear and/or corrosion, and resulting in vibration. If the vehicle continues to be operated in this state, the universal joint could eventually break, potentially damaging surrounding components and rendering the vehicle inoperative. This could increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will replace the front drive shaft.
Recall number
2016505
Recall date
2016-10-13
System affected
Fuel Supply
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
Units Affected:
16,663
Notification Type:
Safety Mfr
On certain vehicles, the wires going to the in-tank fuel pump may not have been crimped correctly. An incorrect crimp could increase the resistance of the circuit which could cause the contact pin to heat and melt the surrounding plastic. This could potentially cause the fuel pump to stop working causing the vehicle to stall without warning, increasing the risk of a crash causing injury and/or damage to property. Also, in a very rare case, a fuel leak combined with an external ignition source, could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the fuel delivery module.
Recall number
2017113
Recall date
2017-03-03
System affected
Powertrain
Model year(s) affected
2011 2012 2013
Manufacturer Recall Number:
Units Affected:
12,100
Notification Type:
Safety Mfr
Certain vehicles may have been manufactured with defective front driveshaft universal joint seals, which could allow water and/or dirt to enter the universal joint, causing accelerated wear and/or corrosion, and resulting in vibration. If the vehicle continues to be operated in this state, the universal joint could eventually break, potentially damaging surrounding components and rendering the vehicle inoperative. This could increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will replace the front drive shaft. Note: This is an expansion of recall 2016-226.
Recall number
2018195
Recall date
2018-04-19
System affected
Electrical
Model year(s) affected
2010 2011 2012
Manufacturer Recall Number:
Units Affected:
3,739
Notification Type:
Safety Mfr
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing injury and/or damage to property. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied. Additional note: This is an expansion of recalls 2011-376 and 2012-008.
Recall number
2018275
Recall date
2018-05-23
System affected
Steering
Model year(s) affected
2009 2010 2011 2012 2013
Manufacturer Recall Number:
Units Affected:
7,179
Notification Type:
Safety Mfr
On certain BMW X5 xDrive35d (diesel) vehicles, the engine belt idler pulley bolt could loosen and/or break. This may cause the belt to detach, resulting in a sudden loss of power steering assist. A vehicle experiencing a loss of power steering assist would revert to a manual steering mode which would require greater driver effort, especially at low vehicle speeds. This could ultimately result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the idler pulley bolt. Note: This recall supersedes and expands upon recall 2012-396.
Recall number
2019018
Recall date
2019-01-15
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
Units Affected:
20,532
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2020008
Recall date
2020-01-15
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
32 80 20RC / 32 81 20RC
Units Affected:
47
Notification Type:
Safety Mfr
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2020010
Recall date
2020-01-15
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011 2012
Manufacturer Recall Number:
72 81 20RC
Units Affected:
11
Notification Type:
Safety Mfr
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag module. The passenger-front airbag module will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Similar Vehicles

Select Another Vehicle
Search now