2009 Ford Ranger

Canadian MSRP
$17,399 - $27,099
2009 Ford Ranger

Key Specifications for 2009 Ford Ranger

Fuel Economy 7.5 - 15.2 City/HWY combined
Horsepower 143 - 207 hp
Drivetrain Rear-Wheel Drive, Four-Wheel Drive
Engine Gasoline
Torque 154 - 238 ft-lb
Seats 2 - 5
 

Review & Compare:
2009 Ford Ranger Trims

The 2009 Ford Ranger has 9 trims. Below you will be able to review all the trims with the option to compare.
9 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2019-005
Recall date
2019-01-08
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
19S01
Units Affected:
300,898
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: This recall supersedes recalls 2016-347 (Ford Safety Improvement Program 16S26), 2017-024 (Ford Recall 17S01) and 2018-035 (Ford Recall 18S01). Vehicles repaired under the previous recalls do not require repair under this recall.
Recall number
2018-035
Recall date
2018-01-17
System affected
Airbag
Model year(s) affected
2009
Manufacturer Recall Number:
18S01
Units Affected:
36,727
Notification Type:
Superseded
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional note: This recall is superseded by recall 2019005 (Ford Recall 19S01). Please see recall 2019005 for more information.
Recall number
2016-347
Recall date
2016-07-06
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
16S26
Units Affected:
5,867
Notification Type:
Superseded
Ford Canada is conducting a voluntary Safety Improvement Program involving passenger airbag inflators in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States equipped with Takata airbags. Ford will replace the driver or passenger inflator on affected vehicles, depending on the vehicle involved. Owners who believe their vehicles may have been originally purchased or registered in the states of New Jersey, Delaware, District of Columbia, Maryland, Pennsylvania, Ohio, Indiana, Illinois, Virginia, West Virginia, Kentucky, Missouri, Nebraska, Kansas, Oklahoma, Arkansas, Tennessee, North Carolina, Nevada, Arizona, New Mexico, California, Texas, Louisiana, Mississippi, Alabama, Georgia, South Carolina, Florida, Hawaii, Puerto Rico or the U.S. Virgin Islands should contact a Ford dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Program is superseded by recall 2019005 (Ford Recall 19S01). Please see recall 2019005 for more information.
Recall number
2011-251
Recall date
2011-07-14
System affected
Lights And Instruments
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
11C18
Units Affected:
5,815
Notification Type:
Safety Mfr
On certain 2011 Ranger vehicles, the multi-function switch, installed during vehicle assembly, could malfunction and fail. Additionally, other vehicle models may have received the affected switch as a replacement part during service, and are therefore also involved in this campaign. Failure of the multi-function switch could result in a loss of turn signal, tail lamp, hazard warning signal flasher and/or stop lamp function. Failure of these lighting components to illuminate may result in the following road users being unaware of the driver's intentions, as well as reducing vehicle conspicuity during hours of darkness, which could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the multi-function switch.
Recall number
2009-018
Recall date
2009-01-20
System affected
Steering
Model year(s) affected
2009
Manufacturer Recall Number:
09S07
Units Affected:
982
Notification Type:
Safety Mfr
On certain Ranger 4x2 pickup trucks, the front spindle may have been manufactured without proper heat treating. As a result the spindle may, over time, fatigue to fracture without warning, which could allow the front spindle and wheel to separate from the vehicle. A wheel separation may result in a loss of control which could lead to a crash, causing property damage, personal injury, or death. Correction: Dealers will verify the front spindle manufacturing date and, if necessary, replace the spindle assembly.

Similar Vehicles

Select Another Vehicle
Search now