Chrysler 300

Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Note: This recall affects the following Powertrain Control Modules (PCM) that were sold through dealers as high-performance accessories: - Mopar Stage 1 high performance Powertrain Control Modules (PCM), part numbers P5160023 and P5160025 (campaign U82) - Mopar high performance Powertrain Control Modules (PCM) included in the Demon Crate, part number 68412287AA (campaign U83) On certain vehicles, an electronic fault may create a situation where the cruise control cannot be deactivated. If this occurs and the driver does not apply the brakes or shift the transmission to neutral, the vehicle could maintain speed or accelerate without warning, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the PCM software and perform an update as necessary. Note: In the interim, owners are advised not to use the cruise control until the vehicle is repaired. This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act, as these aftermarket products were not regulated by the Act.

On certain vehicles equipped with an 8-speed transmission, an incorrect park lock rod may have been installed during the transmission assembly process. This could cause the transmission to lose the Park function, which could result in unintended vehicle movement, which would increase the risk of crash causing injury and/or damage to property. Correction: Dealers will replace the park lock rods.

On certain vehicles equipped with 3.6L engines and 160 amp output alternators, the alternator may fail suddenly. This could result in the engine stalling, causing a loss of motive power which could increase the risk of a crash as well as disable various vehicle safety systems, and could also cause a fire. Both issues could increase the risk of injury and/or damage to property. Correction: Dealers will replace the alternator. Note: This is an expansion of recall 2014-446.

On certain all-wheel drive vehicles, the front propshaft bolts may be loose. This could result in the front propshaft disconnecting from the vehicle, which would lead to loss of motive power while driving and could also damage powertrain and/or underbody components and create a road hazard, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace all eight front propshaft bolts.

On certain vehicles, the gear shift position indicators and warnings may not be sufficient to deter drivers from exiting the vehicle when the transmission is inadvertently left in a gear other than “Park”. If this occurs and the driver exits the vehicle with the engine running and the parking brake has not been set, unintended vehicle movement can result, increasing the risk of injury and/or a crash. Correction: Dealers will update vehicle software to include additional features to protect against driver error.

Fiat Chrysler Automobiles (FCA) Canada is conducting a voluntary Safety Improvement Program involving Takata passenger airbag inflators installed in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States. Fiat Chrysler Automobiles (FCA) will replace the passenger inflator on affected vehicles. Owners who believe their vehicles may have been originally purchased or registered in Florida, Hawaii, Puerto Rico, U.S. Virgin Islands, Texas, Mississippi, Alabama, Louisiana, Georgia, Guam, American Samoa and Saipan should contact a Fiat Chrysler Automobile (FCA) dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Campaign is superseded by recall 2016-265 (FCA Recall S43). Please see recall 2016265 for more information.

Chrysler Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Chrysler Canada will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015228. Please see recall 2015228 for more information: Click here for more information

On certain vehicles, the ignition key may not fully return to the RUN position from the START position once the key is released after starting the vehicle. This could affect various vehicle electrical functions, and also cause an unintended change in ignition switch position, which could cause the engine to stall. This would result in a loss of motive power and affect functioning of the power steering and power braking assist systems as well as other safety systems including airbags. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the Wireless Ignition Node (WIN) module (i.e. ignition switch) and FOBIKs (keys).

On certain vehicles, seat airbag wiring harnesses were built with improperly sized electrical terminal crimps that may cause an intermittent illumination of the airbag warning light. If the airbag light illuminates, the seat side airbags may not deploy in the event of a crash, which could increase the risk of injury. Correction: Dealers will replace driver and passenger seat airbag harnesses.

Certain vehicles may experience a separation at the crimped end of the power steering pressure hose assembly, resulting in power steering fluid leakage which could cause a fire. Correction: Dealers will inspect and, if necessary, replace the power steering pressure hoses.

On certain vehicles, the front wheel spindle nut - which retains the hub, rotor, and wheel assembly - may have been omitted during vehicle assembly. This could allow the wheel assembly to separate from the vehicle while driving, which could result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will inspect for presence of the front wheel spindle nut, and repair any vehicle missing the nut.

On certain vehicles, incorrectly manufactured rear axle hub nuts could, in time, loosen, and allow the halfshaft to disengage from the wheel hub assembly. This could cause the vehicle to lose propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will replace the rear axle hub nuts.

On certain vehicles equipped with the 42RLE automatic transmission, the Powertrain Control Module (PCM) may cause a momentary lock up of the drive wheels if the vehicle is traveling over 65 kph and the operator shifts from drive to neutral and back to drive. Correction: Dealers will reprogram the PCM.

On certain vehicles, the cup plug which retains the park pawl anchor shaft in the 42RLE automatic transmission could be missing or not properly staked in its bore, potentially allowing the shaft to move out of position and preventing the transmission from being placed in the PARK position. If this occurs and the parking brake is not applied, the vehicle may roll away and cause an accident without warning. Correction: Dealers will install a bracket to ensure that the park pawl anchor shaft is retained in the proper position.

On certain vehicles, the fasteners that secure the battery positive cable to the bulkhead pass-through stud may be missing or not tightened to the appropriate specifications. This could result in a potential instrument panel fire. Correction: Dealers will visually inspect and re-torque the fastener on both sides of the bulkhead pass-through stud. Any fasteners found to be missing or damaged will be replaced.