2010 Nissan Titan - Prices, Trims, Options, Specs, Photos, Reviews, Deals | autoTRADER.ca

2010 Nissan Titan

Canadian MSRP
$33,448 - $50,148
Owner Score
2010 Nissan Titan

Key Specifications for 2010 Nissan Titan

Fuel Economy 11.3 - 17.7 City/HWY combined
Horsepower 317 hp
Drivetrain Rear Wheel Drive, 4-Wheel Drive
Engine Gasoline
Torque 385 ft-lb
Seats 5 - 6
 

Trim Comparison

Showing 5 of 10 trims
Standard Standard Not Available Not Available Optional Optional
 
 
 
 
Engine
Engine
 
Displacement
Displacement
 
Fuel System
Fuel System
 
Horsepower
Horsepower
 
Torque
Torque
 
Dead Weight Hitch - Max Trailer Wt.
Dead Weight Hitch - Max Trailer Wt.
 
Dead Weight Hitch - Max Tongue Wt.
Dead Weight Hitch - Max Tongue Wt.
 
Wt Distributing Hitch - Max Trailer Wt.
Wt Distributing Hitch - Max Trailer Wt.
 
Wt Distributing Hitch - Max Tongue Wt.
Wt Distributing Hitch - Max Tongue Wt.
 
Fifth Wheel Hitch - Max Trailer Wt.
Fifth Wheel Hitch - Max Trailer Wt.
 
Fifth Wheel Hitch - Max Tongue Wt.
Fifth Wheel Hitch - Max Tongue Wt.
 
Maximum Trailering Capacity
Maximum Trailering Capacity
 
Steering
Steering
 
Drivetrain
Drivetrain
 
Transmission
Transmission
 

Photos

autoTRADER Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Owner Scores

Based on 1 reviews
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 10
100% Complete
Interior Design 10
100% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete

Owner Reviews

Graymi Reliable October 16, 2012 SE
Overall Score
Have had a Nissan titan since 2008 and have never had a break down. They are powerful yet respectful of fuel mileage. Very innovative features like the bed rails in the box. Would recommend to any one
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 10
100% Complete
Interior Design 10
100% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete
View all owner reviews

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2010159
Recall date
2010-05-26
System affected
Suspension
Model year(s) affected
2010
Manufacturer Recall Number:
R160, R161
Units Affected:
2,759
Notification Type:
Safety Mfr
On certain vehicles, the lower control link assembly collars (forming the inboard attachment point to the chassis) may not have been manufactured correctly. If the collar weld fails, the cylindrical collar can open, which will allow the collar to slip over the mounting bolt and bushing. This may change the wheel camber, which could allow vehicle handling characteristics to deteriorate, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the lower control link assembly.
Recall number
2010088
Recall date
2010-03-24
System affected
Powertrain
Model year(s) affected
2010
Manufacturer Recall Number:
Units Affected:
660
Notification Type:
Service Campaign Mfr
On certain four-wheel drive vehicles, the joint portion of the front driveshaft may contain small cracks. These cracks may eventually lead to a failure, resulting in separation of the front driveshaft. If the driveshaft failed while the vehicle was moving, a loud noise would be heard. If the vehicle were in 2WD mode, the driveshaft would come to rest on the frame cross-member, and the vehicle could be operated normally. The driveshaft would not come in contact with brake, steering or fuel system components, therefore the risk of a crash is considered minimal. Correction: Dealers will inspect the vehicle and replace the front driveshaft if necessary.
Recall number
2010062
Recall date
2010-03-03
System affected
Brakes
Model year(s) affected
2008 2009 2010
Manufacturer Recall Number:
R154, R155
Units Affected:
6,246
Notification Type:
Safety Mfr
On certain vehicles, the brake pedal pivot pin end was not properly manufactured. As a result, the pin may not remain in place, causing the brake pedal to partially disengage from the brake pedal bracket. If this occurs, the driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force. A reduction in braking force may lead to increased stopping distances and the risk of a crash causing property damage, personal injury or death. Correction: Owners of all potentially affected vehicles will be contacted and their brake pedal assembly will be inspected and replaced if necessary.

Similar Vehicles

Select Another Vehicle
Search now