GMC Yukon

GMC Yukon

Photos

Reviews and News

View All Articles

Owner Scores

Based on 20 reviews
Comfort N/A
0% Complete
Performance N/A
0% Complete
Fuel Economy N/A
0% Complete
Interior Design N/A
0% Complete
Exterior Styling N/A
0% Complete
Reliability N/A
0% Complete

Owner Reviews

Lilly6232 Great vehicle November 23, 2017
Overall Score
Not only is this a great looking ride but it's a great ride too. It is large enough that three kids can fit comfortably in the back with plenty of extra room. The gas mileage isn't the best but it's not bad considering the size of it. We love this vehicle.
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 6
60% Complete
Interior Design 8
80% Complete
Exterior Styling 8
80% Complete
Reliability 10
100% Complete
View all owner reviews

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2024-637
Recall date
2024-10-24
System affected
Powertrain
Model year(s) affected
2021
Manufacturer Recall Number:
N242454440
Units Affected:
52,220
Notification Type:
Safety Mfr
Issue: Over time, the transmission control valve could wear and lose pressure. If this happens, the transmission could shift harshly and could cause the rear wheels to lock up. Note: This recall only affects vehicles equipped with a diesel engine. Safety Risk: Rear wheels that lock suddenly could cause a loss of control and increase the risk of a crash. Corrective Actions: General Motors will notify owners by mail and advise you to take your vehicle to a dealership to update the transmission control module software to detect excess wear in advance of a wheel lock up. If detected, a service engine light would turn on, a message would display in the instrument panel and the vehicle would be limited to fifth gear.
Recall number
2024-519
Recall date
2024-09-12
System affected
Lights And Instruments
Model year(s) affected
2023 2024
Manufacturer Recall Number:
N242447990
Units Affected:
38,382
Notification Type:
Compliance Mfr
Issue: On certain vehicles, a software problem could cause the low brake fluid warning lamp not to turn on if the brake fluid level gets too low. A low brake fluid level can cause reduced braking. Safety Risk: A driver that isn't aware of a low brake fluid level could experience reduced braking and an increased risk of a crash. Corrective Actions: General Motors will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the electronic brake control module software. Alternatively, you may schedule an appointment to have the update performed at a GM dealership.
Recall number
2024-060
Recall date
2024-02-01
System affected
Lights And Instruments
Model year(s) affected
2021 2022 2023 2024
Manufacturer Recall Number:
N232431050
Units Affected:
273,306
Notification Type:
Compliance Mfr
Issue: On certain vehicles, a software problem could cause the lower beam headlamps not to turn on as it becomes dark outside if the multi-function switch is in the "OFF" or "PARKING LAMP" position. This could also cause the daytime running lamps (DRLs) to turn off when the vehicle is moving. As a result, the vehicles may not meet certain requirements of Canadian regulations. Safety Risk: Headlamps and/or DRLs that don't turn on could reduce visibility, make the vehicle less visible to others and increase the risk of a crash. Corrective Actions: General Motors will notify owners by mail and advise you to take your vehicle to a dealership to update the body control module (BCM)software.
Recall number
2023-472
Recall date
2023-08-24
System affected
Lights And Instruments
Model year(s) affected
2021 2022 2023
Manufacturer Recall Number:
N232417190
Units Affected:
163,611
Notification Type:
Compliance TC
Issue: On certain vehicles, the automatic headlamps may not turn on soon enough as it becomes dark outside. Canadian regulations require automatic headlamps to turn on when the ambient light level drops below a certain point (1000 lux). Safety Risk: Headlamps that don't turn on as it becomes dark outside could reduce visibility and increase the risk of a crash. Corrective Actions: General Motors will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the body control module (BCM) software. Alternatively, you may schedule an appointment to have the update performed at a GM dealership.
Recall number
2022-700
Recall date
2022-12-08
System affected
Lights And Instruments
Model year(s) affected
2022 2023
Manufacturer Recall Number:
N222386380
Units Affected:
85,685
Notification Type:
Compliance Mfr
Issue: On certain vehicles, the daytime running lamps (DRLs) may stay on when the headlamps are on. Canadian regulations require the DRLs to turn off when the headlamps are on. Safety Risk: Daytime running lamps that stay on could cause glare for oncoming drivers and increase the risk of a crash. Corrective Action: General Motors will notify owners by mail and instruct you to take your vehicle to a dealership to update the body control module (BCM) software.
Recall number
2022-634
Recall date
2022-11-03
System affected
Lights And Instruments
Model year(s) affected
2021
Manufacturer Recall Number:
N222382220
Units Affected:
16,026
Notification Type:
Compliance Mfr
Issue: On certain vehicles, the daytime running lamps (DRLs) may stay on when the headlamps are on. Canadian regulations require the DRLs to turn off when the headlamps are on. Safety Risk: Daytime running lamps that stay on could cause glare for oncoming drivers and increase the risk of a crash. Corrective Action: General Motors will notify owners by mail and and send a wireless over-the-air software update to eligible vehicles to update the body control module (BCM) software. Alternatively, you may schedule an appointment to have the update performed at a GM dealer.
Recall number
2022-456
Recall date
2022-08-11
System affected
Seats And Restraints
Model year(s) affected
2021 2022
Manufacturer Recall Number:
N222372380
Units Affected:
30,096
Notification Type:
Safety Mfr
Issue: On certain vehicles, the left and/or right third-row seat belt buckles may not have been attached correctly. As a result, the seat belts could detach in a crash. Safety Risk: A seat belt that detaches in a crash could create an increased risk of injury. Corrective Actions: General Motors will notify owners by mail and instruct you to take your vehicle to a dealership to inspect, and if necessary, replace the left and/or right third-row seat belt buckle assemblies.
Recall number
2022-027
Recall date
2022-01-27
System affected
Powertrain
Model year(s) affected
2021
Manufacturer Recall Number:
N212351030 / N212351031 / N212351032
Units Affected:
141
Notification Type:
Safety Mfr
Issue: On certain vehicles, parts inside the rear axle shafts may not have been manufactured properly. Over time, this could lead to wear that can cause noise and vibration. If you continue to drive the vehicle with these symptoms, an axle shaft could seize and cause a loss of power to the wheels. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Corrective Actions: General Motors will notify owners by mail and instruct you to take your vehicle to a dealer to replace the left and/or right-rear axle shafts.
Recall number
2021-348
Recall date
2021-06-03
System affected
Airbag
Model year(s) affected
2021
Manufacturer Recall Number:
N212338110
Units Affected:
16,071
Notification Type:
Safety Mfr
Issue: On certain vehicles, a software problem could cause the airbag warning light not to turn on when there is a fault in the airbag system. As a result, a driver might not be alerted of the problem and the airbags may not work properly in a crash. Safety Risk: An airbag system that does not work properly could create an increased risk of injury in a crash. Corrective Actions: General Motors will notify owners by mail and send a wireless over-the-air software update to each vehicle. Alternatively, you may schedule an appointment to have the update performed by a dealer.
Recall number
2021-165
Recall date
2021-03-18
System affected
Seats And Restraints
Model year(s) affected
2021
Manufacturer Recall Number:
N202313000
Units Affected:
3,010
Notification Type:
Safety Mfr
Issue: On certain vehicles, the outboard seat belts for the third-row seat may have been installed incorrectly. As a result, the seat belts could be mis-routed or damaged by sharp edges on the seat-folding parts. Safety Risk: A damaged seat belt could break in a crash and increase the risk of injury. Corrective Actions: General Motors will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the third-row outboard seat belts for correct routing and damage. The seat belt path will be corrected if required. Damaged seat belts will be replaced.
Recall number
2021-059
Recall date
2021-02-11
System affected
Fuel Supply
Model year(s) affected
2021
Manufacturer Recall Number:
N212327720
Units Affected:
3
Notification Type:
Safety Mfr
Issue: On a small number of vehicles, a defect in the fuel tank could cause it to develop a slow leak at its seam. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: General Motors will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel tank.
Recall number
2020-645
Recall date
2020-12-23
System affected
Seats And Restraints
Model year(s) affected
2021
Manufacturer Recall Number:
N202322231 / N202322232 / N202322233 / N202322235
Units Affected:
41
Notification Type:
Safety Mfr
Issue: On certain vehicles, the seat belts may have been installed with the wrong bolts. As a result, the seat belt may not be properly attached and may not work as designed in a crash. Safety Risk: A seat belt that does not work properly could increase the risk of injury in a crash. Corrective Actions: General Motors will notify owners by mail and instruct you to take your vehicle to a dealer to replace the seat belt bolts, as necessary.
Recall number
2020-459
Recall date
2020-10-01
System affected
Brakes
Model year(s) affected
2018
Manufacturer Recall Number:
N202300860
Units Affected:
2,933
Notification Type:
Safety Mfr
Issue: On certain vehicles, there could be a reduction in power brake assist due to a decrease in output from the vacuum pump. This could cause a hard brake pedal and create an increase in brake pedal effort that is required to stop the vehicle. Note: This is an expansion of Transport Canada Recall 2019-324. Safety Risk: A sudden increase in brake pedal force could lead to an increase in stopping distance. This could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to reprogram the electronic brake control module.
Recall number
2019-533
Recall date
2019-10-24
System affected
Brakes
Model year(s) affected
2015 2016 2017 2018 2019 2020
Manufacturer Recall Number:
N192261050
Units Affected:
37,373
Notification Type:
Safety Mfr
Issue: On certain vehicles, there may be an error in the electronic-brake control module software. This could cause the driveline-protection system to activate when a wheel-speed sensor fails. If this happens, the brakes could apply and cause the vehicle to pull to one side. Note: This recall only affects vehicles equipped with four-wheel drive, a 5.3-L engine, and a 3.08 ratio rear axle. The problem can only occur when the vehicle is in four-wheel drive or automatic mode, and travelling at a speed between 66 and 97 km/h (41 and 60 mph). A wheel-speed sensor failure will cause the electronic stability control (ESC) and anti-lock braking system (ABS) warning lights to turn on, and a "Service StabiliTrak" message to display. Safety Risk: A vehicle that suddenly pulls to one side could increase the risk of a crash. Corrective Actions: General Motors will notify owners by mail and instruct you to take your vehicle to a dealer to update the electronic-brake control module software. General Motors advises that using two-wheel-drive mode can eliminate the risk until the recall repair is completed.
Recall number
2019-420
Recall date
2019-08-21
System affected
Other
Model year(s) affected
2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
Manufacturer Recall Number:
Units Affected:
5,327
Notification Type:
Compliance Mfr
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Recall number
2019-324
Recall date
2019-06-28
System affected
Brakes
Model year(s) affected
2015 2016 2017 2018
Manufacturer Recall Number:
N192217410
Units Affected:
310,121
Notification Type:
Safety TC
Issue: On certain vehicles, there could be a reduction in power brake assist due to a decrease in output from the vacuum pump. This could cause a hard brake pedal and an increase in brake pedal effort to stop the vehicle. Safety Risk: A sudden increase in brake pedal force could lead to an increase in stopping distance. This could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to reprogram the electronic brake control module.
Recall number
2018-482
Recall date
2018-09-07
System affected
Steering
Model year(s) affected
2015
Manufacturer Recall Number:
18289
Units Affected:
95,832
Notification Type:
Safety Mfr
Certain vehicles may experience a temporary loss of electric power steering (EPS) assist followed by a sudden return of EPS assist, particularly during low-speed turning manoeuvres due to an electrical/software issue. If EPS assist is lost and suddenly returned, the unexpected change in steering effort could affect vehicle control, which would increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update the EPS module software. Note: If power steering assist is lost and the vehicle reverts to manual steering, a dash message would be displayed stating there is an EPS problem. Additionally, this issue could also affect radio, stabilitrak, the driver information centre, chime, door-lock, air conditioning, and/or cruise control function.
Recall number
2017-342
Recall date
2017-07-10
System affected
Airbag
Model year(s) affected
2015
Manufacturer Recall Number:
17287
Units Affected:
152
Notification Type:
Safety Mfr
On certain vehicles, the sensing and diagnostic module (SDM), which controls airbag and pretensioner deployment, contains a software defect which may prevent the deployment of frontal airbags and pretensioners in certain circumstances. Failure of frontal airbags and seatbelt pretensioners to deploy in a crash (when warranted) could increase the risk of injury. Correction: Dealers will reflash the SDM with new software. In vehicles with any previous deployment events recorded in the SDM, the dealers will replace the existing SDM with a new SDM containing the latest software.
Recall number
2016-502
Recall date
2016-10-12
System affected
Tires
Model year(s) affected
2015 2016
Manufacturer Recall Number:
16049
Units Affected:
1,435
Notification Type:
Safety Mfr
On certain vehicles equipped with Continental P275/55R20 CrossContact LX20 tires, a manufacturing defect could cause a lack of adhesion between belts in the tire. Affected tires may exhibit localized tread wear, excessive vibration, noise and bulging in the tread area. Continued use could cause the belts to separate, which could lead to full belt/tread loss. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect tire date code markings to determine whether they are from the affected date code. Affected tires will be replaced.
Recall number
2016-439
Recall date
2016-09-09
System affected
Airbag
Model year(s) affected
2015 2016
Manufacturer Recall Number:
16007
Units Affected:
362,263
Notification Type:
Safety Mfr
On certain vehicles, the sensing and diagnostic module (SDM), which controls airbag and pretensioner deployment, contains a software defect which may prevent the deployment of frontal airbags and pretensioners in certain circumstances. Failure of frontal airbags and seatbelt pretensioners to deploy in a crash (when warranted) could increase the risk of injury. Correction: Dealers will reflash the SDM with new software. In vehicles with any previous deployment events recorded in the SDM, the dealers will replace the existing SDM with a new SDM containing the latest software. Note: This recall affects 2014-2017 model year Sierra LD/Silverado LD models and 2015-2016 model year Sierra HD/Silverado HD model vehicles.
Recall number
2016-307
Recall date
2016-06-15
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
49151, 49152
Units Affected:
7,809
Notification Type:
Service Campaign Mfr
General Motors Canada is conducting a voluntary Safety Improvement Program involving passenger airbag inflators in vehicles that were originally sold or ever registered in certain areas of the United States that experience high or moderate levels of heat and humidity, and that were subsequently imported into Canada. Dealers will replace the passenger inflator on affected vehicles. Owners who believe their vehicles may have been originally purchased or registered in the states listed below should contact a General Motors dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Affected states: American Samoa and the U.S. Virgin Islands, Alabama, Arizona, Arkansas, California, Delaware, District of Columbia, Florida, Georgia, Guam, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Puerto Rico, South Carolina, Tennessee, Texas, the Northern Mariana Islands (Saipan), Virginia and West Virginia.
Recall number
2016-190
Recall date
2016-04-28
System affected
Suspension
Model year(s) affected
2016
Manufacturer Recall Number:
42190
Units Affected:
432
Notification Type:
Safety Mfr
Certain vehicles may have been built with front upper control arms with a poor quality weld near the control arm’s bushing. If these welds were to fail, it could cause the upper control arm to deform or separate from the bushing, which could affect steering and directional control of the vehicle, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the left and right front upper control arms, and perform a realignment.
Recall number
2015-002
Recall date
2014-12-30
System affected
Electrical
Model year(s) affected
2011 2012
Manufacturer Recall Number:
14696 / 14912
Units Affected:
10,651
Notification Type:
Safety Mfr
On certain vehicles, a defect in the ignition lock cylinder could cause the key to stick in the "start" position if the vehicle interior temperature is sufficiently high. If the vehicle is operated in this condition and the interior temperature cools or the vehicle goes off-road or is subjected to some other jarring event, the key could move out of the "start" position, rotate past the "run" position and into the "accessory" position. If this were to occur, engine power, power steering and power braking would be affected, increasing the risk of a crash causing injury and/or damage to property. The timing of the key movement out of the “run” position, relative to the activation of the sensing algorithm of the crash event, may also result in the airbags not deploying in a subsequent collision, increasing the risk of injury. Correction: Dealers will inspect the steering column for identifying information and replace if necessary.
Recall number
2014-577
Recall date
2014-12-18
System affected
Engine
Model year(s) affected
2015
Manufacturer Recall Number:
14008
Units Affected:
10
Notification Type:
Safety Mfr
On certain vehicles, exhaust components may overheat while the vehicle is idling in cold temperatures. This could cause nearby plastic components to overheat and melt, possibly resulting in smoke and/or fire and increasing the risk of injury and/or damage to property. Correction: Dealers will reprogram the engine control module. Note: This is an expansion of recall 2014-005.
Recall number
2014-553
Recall date
2014-12-05
System affected
Lights And Instruments
Model year(s) affected
2015
Manufacturer Recall Number:
14554
Units Affected:
3,540
Notification Type:
Inconsequential
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. If the headlamp switch is rapidly and repeatedly cycled between positions (at least two cycles within 0.6 seconds), park lamp and daytime running light function could be disabled, which is contrary to the requirements of the standard. Correction: A production change has been undertaken to remedy this technical non-compliance condition. No corrective recall action is required as the technical non-compliance condition is deemed to be non-safety related.
Recall number
2014-432
Recall date
2014-10-03
System affected
Electrical
Model year(s) affected
2013 2014
Manufacturer Recall Number:
14515
Units Affected:
5,071
Notification Type:
Safety Mfr
On certain vehicles, the chassis electronic module may have been contaminated at time of manufacture, which could cause an electrical short to occur within the module. This could cause the vehicle's check engine light to be displayed, or cause the engine to fail to start or stall, resulting in a loss of motive power. If the vehicle is equipped to support electric trailer brakes, the vehicle could also lose trailer brake function and display a "Service Trailer Brake System" indicator. These issues could increase the risk of a crash resulting in injury and/or damage to property. Correction: Dealers will replace the module with a revised part.
Recall number
2014-254
Recall date
2014-06-27
System affected
Powertrain
Model year(s) affected
2015
Manufacturer Recall Number:
14192
Units Affected:
53,607
Notification Type:
Safety Mfr
Certain vehicles equipped with an Automatic Transfer Case may have a condition in which an electric signal short may cause the transfer case to switch to neutral without operator input. The transfer case mode selection knob would still indicate the last selected drive mode, but the driver would not have any feedback that the transfer case is in neutral. If the transfer case switches to neutral while the vehicle is in motion, the driver would experience a loss of motive power and, if the vehicle is parked without the parking brake applied, the vehicle could roll away. Both scenarios could result in a crash causing injury and/or damage to property. Correction: Dealers will re-program the software of the Transfer Case Control Module.
Recall number
2014-216
Recall date
2014-06-06
System affected
Accessories
Model year(s) affected
2015
Manufacturer Recall Number:
14315
Units Affected:
5,439
Notification Type:
Compliance Mfr
Certain vehicles equipped with a base radio and internal amplifier may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 114 - Theft Protection and Rollaway Protection, and CMVSS 208 - Occupant Crash Protection. The radio may become inoperative, causing a no-chime condition and disabling the audible warning if the key is in the ignition and the driver’s door is opened, or if a front outboard seat belt is not buckled. A loss of the seat belt audible warning may increase the likelihood of a front outboard occupant being unbelted, increasing the risk of injury in a crash. Similarly, the loss of an audible warning when a key is left in the ignition may increase the risk of vehicle theft. Correction: Dealers are to program the radio with updated software.
Recall number
2014-102
Recall date
2014-03-31
System affected
Powertrain
Model year(s) affected
2015
Manufacturer Recall Number:
14121
Units Affected:
51,259
Notification Type:
Safety Mfr
On certain vehicles equipped with 6 speed automatic transmissions, transmission cooler lines may not have been securely seated in their fittings at time of assembly. This could result in a transmission fluid leak in proximity to hot surfaces which could increase the risk of a fire, potentially causing injury and/or property damage. Correction: Dealers will inspect connections and repair as necessary.
Recall number
2013-001
Recall date
2012-12-31
System affected
Other
Model year(s) affected
2013
Manufacturer Recall Number:
12331
Units Affected:
6,310
Notification Type:
Compliance Mfr
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 102 – Transmission Control Functions, and CMVSS 114 – Theft Protection and Rollaway Prevention. A fractured park lock cable, or a defective steering lock module, may have been installed during vehicle assembly. This could allow the driver to shift out of PARK with the key in the OFF position or removed from the ignition. As well, the transmission may be shifted out of PARK without first depressing the brake pedal. The key may also be rotated to the OFF position and removed while the shifter is not in PARK. These issues could result in unintended vehicle movement, which could cause a crash resulting in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the steering column assembly.
Recall number
2011-240
Recall date
2011-06-28
System affected
Steering
Model year(s) affected
2011
Manufacturer Recall Number:
11191
Units Affected:
97
Notification Type:
Safety Mfr
On certain vehicles, the intermediate steering shaft attaching bolts may not have received adequate tightening torque during vehicle assembly. This could allow the joint to separate, resulting in a loss of steering capability. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: Dealers will tighten the intermediate steering shaft bolts to specifications.
Recall number
2011-074
Recall date
2011-02-21
System affected
Heater And Defroster
Model year(s) affected
2003 2004 2005 2006
Manufacturer Recall Number:
11046
Units Affected:
190,310
Notification Type:
Safety TC
On certain vehicles, the interface between the electrical terminals of the Heating, Ventilation, and Air Conditioning (HVAC) blower relay resistor module and the wiring connector (which powers the module) may be incapable of conducting higher current levels for sustained periods of operation. In addition, moisture and other contaminants (such as road de-icing materials) may enter the fresh air intake plenum and contact the internal circuit of the module or corrode the terminals. These conditions may cause the relay resistor module or wiring connector to overheat, causing various symptoms such as: the HVAC blower may not function on certain or all blower speed settings; a burning-plastic smell or smoke may be present in the vehicle, or; the HVAC blower may run continually with the ignition in the OFF position. These warning signs could, in certain instances, be leading indicators of an impending vehicle fire, which could result in property damage and/or personal injury. Correction: Owners will be provided with additional warranty coverage for the blower motor resistor module/wiring connector overheating condition. Under this "special warranty coverage", should this condition occur within 10 years or 240,000 km from first vehicle registration, dealers will install a replacement blower motor resistor and resistor module connector.
Recall number
2010-454
Recall date
2010-12-17
System affected
Suspension
Model year(s) affected
2011
Manufacturer Recall Number:
10426
Units Affected:
3,945
Notification Type:
Safety Mfr
On certain vehicles, the rear axle cross pin was improperly heat treated (during the manufacturing process) and could fracture and become displaced within the rear differential. As a result the driver may hear a banging noise emanating from the rear axle. Also, if the pin shifts out of position it could create an interference and cause the rear axle to lock. This could cause a loss of vehicle control, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the rear axle cross pin.
Recall number
2010-189
Recall date
2010-06-07
System affected
Accessories
Model year(s) affected
2007 2008 2009
Manufacturer Recall Number:
10153
Units Affected:
99,000
Notification Type:
Safety Mfr
On certain vehicles equipped with a Heated Washer Fluid System (HWFS), a short circuit on the printed circuit board for the washer fluid heater may overheat the control-circuit ground wire. A repair was implemented in a recall in 2008, however, there have been new reports of thermal incidents on heated washer fluid system modules after this improvement was installed. This situation may cause some minor distortion, but also could lead to melting of the plastic around the heated washer fluid system, or cause a fire. Correction: Dealers will permanently disable and remove the heated washer fluid module. An updated page will be provided and inserted in the Owner Manual to document the removal of the feature.
Recall number
2009-132
Recall date
2009-05-07
System affected
Fuel Supply
Model year(s) affected
2009
Manufacturer Recall Number:
08411
Units Affected:
3,106
Notification Type:
Safety Mfr
On certain vehicles, the fuel system control module may be subject to water intrusion. This could cause a short or open circuit, illumination of the Service Engine Soon lamp, setting diagnostic trouble codes, or the engine may be hard to start, may not start or may stall. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will replace the fuel system control module.
Recall number
2008-313
Recall date
2008-08-29
System affected
Other
Model year(s) affected
2007 2008
Manufacturer Recall Number:
08048
Units Affected:
54,431
Notification Type:
Safety Mfr
On certain vehicles equipped with a heated washer fluid system, a short circuit on the printed circuit board for the washer fluid heater may overheat the control-circuit ground wire. This situation may cause other electrical features to malfunction which could cause smoke and in some cases a fire. Correction: Dealer will install a wire harness with an in-line fuse.
Recall number
2005-296
Recall date
2005-10-07
System affected
Steering
Model year(s) affected
2006
Manufacturer Recall Number:
05086
Units Affected:
6,487
Notification Type:
Safety Mfr
Certain vehicles may have been built with a power steering hose that is not to specification. Under extreme steering manoeuvres, such as turning the steering wheel fully to the left or right while braking, the hose may fracture and leak fluid. If this were to occur, power steering assist would be lost and increased steering effort would be required. On vehicles equipped with hydro-boost power brakes, it could also result in loss of power brake assist and increase braking effort would be required. If power steering fluid were to spray onto hot engine parts, an engine compartment fire could occur. Correction: Dealers will inspect the power steering hose(s) for two suspect date codes and replace them if required.
Recall number
2005-119
Recall date
2005-04-25
System affected
Seats And Restraints
Model year(s) affected
2003 2004 2005
Manufacturer Recall Number:
05037
Units Affected:
73,473
Notification Type:
Safety Mfr
On certain vehicles, the 2nd row centre occupant seat belt routing may make it difficult to position the lap portion of the safety belt low around the hips of occupants. A lap portion of the seat belt routing that is not low and snug on the hips can allow unfavourable occupant kinetics in the event of a crash. Moreover, the higher routing allows the lap belt to ride up on an occupant's abdomen instead of fitting low around their hipbones, and therefore, can expose them to more risk of abdominal and internal organ injury. Correction: Dealers will modify the guide loop.
Recall number
2005-038
Recall date
2005-02-15
System affected
Lights And Instruments
Model year(s) affected
2005
Manufacturer Recall Number:
05023
Units Affected:
260
Notification Type:
Safety Mfr
Certain vehicles equipped with an automatic transmission fail to comply with the requirements of CMVSS 101 - Location, identification and illumination of displays. Under certain vehicle starting conditions, the shift lever position indicator located in the instrument panel cluster may not illuminate. In subsequent vehicle start-ups, this condition may or may not occur again. If the shift lever position indicator does not illuminate, the driver may not know which gear the vehicle is in and the vehicle may move in an unintended direction, resulting in possible injury to others outside of the vehicle. Correction: Dealers will reprogram the instrument panel cluster.
Recall number
2004-395
Recall date
2004-11-05
System affected
Brakes
Model year(s) affected
2000 2001 2002
Manufacturer Recall Number:
04094
Units Affected:
158,474
Notification Type:
Safety TC
Certain vehicles located in Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador may experience unwanted Antilock Brake System (ABS) activation and increased stopping distances during low-speed brake application (less than 16 km/h and greater than 6 km/h). This condition does not set any ABS codes nor does it illuminate the ABS warning lamp. Correction: Dealers will remove the wheel speed sensor and thoroughly clean the wheel speed sensor mounting surface on the bearing, apply Zinc-X to the cleaned surface, grease the mounting surface, reinstall the wheel speed sensor, and check the output voltage to ensure the wheel speed signal is within specifications.
Recall number
2004-281
Recall date
2004-08-05
System affected
Fuel Supply
Model year(s) affected
2005
Manufacturer Recall Number:
04066
Units Affected:
63
Notification Type:
Safety Mfr
On certain vehicles, the fuel rail crossover tube retainer screws were not manufactured to specifications and may break. If a tube retainer screw breaks, fuel could leak from the fuel rail crossover joint, the engine may stall and, if an ignition source were present, an engine compartment fire could occur. Correction: Dealers will inspect the fuel rail crossover tube assembly and, if necessary, replace the two tube retainer screws.
Recall number
2004-037
Recall date
2004-01-29
System affected
Brakes
Model year(s) affected
2003 2004
Manufacturer Recall Number:
04004
Units Affected:
4,075
Notification Type:
Safety Mfr
On certain vehicles, the relief valve o-ring seal within the brake hydro-boost module could fail. If this happens during braking applications, the driver may be able to hear an engine compartment noise similar to the sound that occurs when the steering wheel is turned to a full stop position. The driver could also experience a slight increase in steering efforts while braking and parking. Under certain driving conditions, a slight increase in the applied brake pedal effort may be required to achieve the same vehicle deceleration rate as prior to the seal failure. Correction: Dealers will inspect the hydro-boost module, and replace it, if necessary.
Recall number
2003-294
Recall date
2003-11-26
System affected
Visual System
Model year(s) affected
2003
Manufacturer Recall Number:
Units Affected:
27,525
Notification Type:
Compliance Mfr
Certain vehicles do not comply with either CMVSS 105, or CMVSS 135. The red brake warning indicator will not be illuminated while the ABS is modulating the front brakes. Correction: Since this does not pose any safety risk, no corrective action is required.
Recall number
2003-063
Recall date
2003-03-17
System affected
Label
Model year(s) affected
2003
Manufacturer Recall Number:
Units Affected:
43,000
Notification Type:
Safety Mfr
On certain vehicles, the following statements were omitted from the SIR caution label: "Never put a rear-facing child seat in the front" for the vehicles without an air bag switch or "Never put a rear-facing child seat in the front unless air bag is off" for vehicles with an air bag switch and "Sit far back as possible from the air bag". The statements are printed in the Owner's Manual. Correction: None required as instructions are in the owners manual and this is well known by the public.
Recall number
2002-166
Recall date
2002-09-20
System affected
Seats And Restraints
Model year(s) affected
2000 2001 2002
Manufacturer Recall Number:
02039
Units Affected:
17,569
Notification Type:
Safety Mfr
Certain vehicles equipped with rearward folding head restraints on the second row seats. Two potential pinch points exist on each of the folding head restraints when the head restraint(s) are folded rearward as the seatback is folded down. If a person were to insert their finger(s) into the pinch point when the head restraint folds, it could trap and pinch the finger(s) causing injury. Correction: Dealers will install protective covers over the pinch points.
Recall number
2002-120
Recall date
2002-06-28
System affected
Airbag
Model year(s) affected
2000
Manufacturer Recall Number:
02029
Units Affected:
44,043
Notification Type:
Safety TC
Certain vehicles have an air bag sensing diagnostic module (SDM) which contains an anomaly that could result in the driver and passenger's air bag failing to deploy during certain frontal collisions. In a vehicle crash, front seat occupants may receive more severe injuries. Correction: Dealers will recalibrate the SDM.
Recall number
2002-068
Recall date
2002-04-11
System affected
Seats And Restraints
Model year(s) affected
2001 2002
Manufacturer Recall Number:
02014
Units Affected:
63,049
Notification Type:
Compliance Mfr
Certain vehicles fail to conform to CMVSS 209, seat belt assemblies. These vehicles have a condition where one or two sensors in the driver's and front seat passengers seat belt retractors may be inoperative. The seat belt retractors will lock when the belt webbing is extracted during a crash; however the mechanism that locks the seat belt retractor when the vehicle decelerates quickly, such as during heavy braking, may not restrain the occupant as intended during a crash, and could result in injury to the occupant. Correction update: None required as no effect on vehicle safety. See recall 04-158.
Recall number
2001-135
Recall date
2001-05-23
System affected
Seats And Restraints
Model year(s) affected
2001
Manufacturer Recall Number:
01043
Units Affected:
685
Notification Type:
Safety Mfr
Certain vehicles have an internal component in the 2nd and 3rd row outboard seat belt retractor that could be cracked. With repeated actuation of the locking mechanism, the crack could spread to the point where the seat belt would no longer lock. In a crash, increased occupant injury could result from the no-lock condition. Correction: Dealers will inspect the outboard seat belts for specific lot numbers and replace the belts if necessary. GM is enclosing an inspection procedure for the owners to use or they can have their dealers do the inspections.
Recall number
2001-092
Recall date
2001-04-12
System affected
Electrical
Model year(s) affected
2001
Manufacturer Recall Number:
01001
Units Affected:
22
Notification Type:
Safety Mfr
On certain Yukon Denali and Yukon XL Denali vehicles, the positive battery cable assembly that could come in contact with the steering shaft universal joint. This could eventually cause a wear through of the cable assembly convoluted conduit and cable insulation and result in intermittent electrical shorting. This could result in overheating and igniting of the cable insulation and conduit and a possible underhood fire. Correction: Dealers will inspect the positive battery cable for proper routing and reroute if necessary. Cable will also be inspected for wear of the conduit and cable insulation, and replaced if necessary.
Recall number
2000-270
Recall date
2000-11-17
System affected
Brakes
Model year(s) affected
1999 2000
Manufacturer Recall Number:
00093
Units Affected:
116,675
Notification Type:
Safety Mfr
On certain vehicles, the body cross sill may contact the front, right-hand brake pipe. This could eventually wear a hole in the brake pipe over the normal life of the vehicle and result in a brake fluid leak. This could ultimately result in a partial brake system failure and increased stopping distances. Correction: Dealers will inspect for brake pipe wear and replace worn section if necessary. A spacer clip will be installed to ensure adequate clearance.
Recall number
2000-269
Recall date
2000-11-17
System affected
Structure
Model year(s) affected
2000 2001
Manufacturer Recall Number:
00084
Units Affected:
1,804
Notification Type:
Safety Mfr
Certain vehicles may have loose or missing rear wheelhouse plugs. Under certain operating conditions, exhaust gases can flow forward and accumulate in the rear wheelhouse. These exhaust gases could flow into the passenger compartment if the wheelhouse plug is missing or loose and may cause possible illness, unconsciousness or death. Correction: Dealers will inspect for loose or missing wheelhouse plugs, and install new plugs if necessary.
Recall number
2000-175
Recall date
2000-08-28
System affected
Brakes
Model year(s) affected
2000
Manufacturer Recall Number:
00051
Units Affected:
98
Notification Type:
Compliance Mfr
Certain vehicles do not comply with the requirements of C.M.V.S.S. 105 - Hydraulic and Electric Brake Systems. Vehicles may have a kinked brake booster vacuum supply hose which could increase stopping distances in multiple brake applications. Correction: Brake vacuum booster supply hose will be rerouted.
Select Another Vehicle
Search now