On certain vehicles equipped with Electronic Column Lock systems (ECL), when the ignition switch is turned to "Lock", the ECL prevents turning of the steering system. When the vehicle is started, the ECL unlocks the steering system. The vehicle is designed so that if the column fails to unlock when the vehicle is started and the customer tries to drive, the fuel supply will be shut off so that the vehicle cannot move when the vehicle cannot be steered. If voltage at the Powertrain Control Module (PCM) is low or interrupted, the fuel shut off may not occur and the vehicle can be accelerated while the steering system is locked. Correction: On vehicle equipped with an automatic transmission, the dealer will disable the steering column lock by removing the column lock plate. When the ignition key is removed, the transmission shifter will lock but the steering column will not lock. On vehicle equipped with a manual transmission, the dealer will reprogram the PCM. The steering column on these vehicles will continue to lock when the key is removed..
Certain vehicles may exhibit a condition in which the lap belt webbing may twist, allowing the webbing to become jammed in the retractor. When the belt webbing becomes jammed in the retractor, the belt may be unuseable. In a vehicle crash, and unbelted occupant may receive more severe injuries. Correction: Dealers will install inserts to the belt web guide of each lap belt retractor.