2007 Kia Rondo

Canadian MSRP
$19,995 - $25,995
2007 Kia Rondo

Key Specifications for 2007 Kia Rondo

Fuel Economy 7.5 - 11.8 City/HWY combined
Horsepower 162 - 182 hp
Drivetrain Front-Wheel Drive
Engine Gasoline
Torque 164 - 182 ft-lb
Seats 5 - 7
 

Review & Compare:
2007 Kia Rondo Trims

The 2007 Kia Rondo has 5 trims. Below you will be able to review all the trims with the option to compare.
5 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2013-098
Recall date
2013-04-03
System affected
Electrical
Model year(s) affected
2007 2008 2009 2010 2011 2012
Manufacturer Recall Number:
RC084
Units Affected:
106,098
Notification Type:
Safety TC
On certain vehicles, the stop lamp switch may fail and cause intermittent operation of the brake lights. Failure of the brake lights to illuminate when the brake pedal is depressed could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the switch.
Recall number
2012-014
Recall date
2012-01-18
System affected
Airbag
Model year(s) affected
2007 2008
Manufacturer Recall Number:
RC082
Units Affected:
15,151
Notification Type:
Safety Mfr
On certain vehicles, the clockspring assembly for the driver's airbag may become damaged and fail. As a result the airbag may not function as intended, and the instrument panel warning lamp would illuminate. Failure of the driver's frontal airbag to deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the airbag clockspring assembly.
Recall number
2009-140
Recall date
2009-05-14
System affected
Electrical
Model year(s) affected
2006 2007
Manufacturer Recall Number:
RC072
Units Affected:
11,386
Notification Type:
Safety Mfr
On certain vehicles, the stop lamp switch may have been incorrectly installed during vehicle assembly. This could prevent proper brake lamp operation. Failure of the brake lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing injury or death. A malfunction of the switch may also cause the brake lamps to remain illuminated when the brake pedal is released. Additionally, a faulty switch may affect the operation of the brake-transmission shift interlock on automatic transmission-equipped vehicles so that the transmission shifter would not be able to be shifted out of PARK position. It may also cause the Electronic Stability Control (ESC) light to illuminate, and it may not deactivate the cruise control when the brake pedal is depressed. Correction: Dealers will replace the stop lamp switch assembly.
Recall number
2008-342
Recall date
2008-09-22
System affected
Fuel Supply
Model year(s) affected
2007 2008
Manufacturer Recall Number:
RC071
Units Affected:
5,195
Notification Type:
Safety Mfr
On certain vehicles, an incorrect dimensional characteristic of the fuel pumps upper body can result in a misalignment of the armature shaft, which may cause some fuel pumps to experience poor brush-to-commutator contact conditions. In addition use of a 10 percent ethanol blend fuel can cause a film built-up that creates a high resistance between the brush and the commutator. The misaligned armature shaft prevents the brush and the commutator from making sufficient contact to overcome the high resistance film build-up between the brush and commutator. As a result the fuel pump may produce less pumping pressure than required to supply the fuel injection system resulting in poor starting or hesitation. Loss of propulstion, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will replace the fuel pump assembly.

Similar Vehicles

Select Another Vehicle
Search now