2006 Toyota Tundra - Prices, Trims, Options, Specs, Photos, Reviews, Deals | autoTRADER.ca

2006 Toyota Tundra

Canadian MSRP
$26,010 - $48,015
Owner Score
2006 Toyota Tundra

Key Specifications for 2006 Toyota Tundra

Fuel Economy 9.7 - 15.8 City/HWY combined
Horsepower 236 - 271 hp
Drivetrain Rear-Wheel Drive, Four-Wheel Drive
Engine Gasoline
Torque 266 - 313 ft-lb
Seats 3 - 6
 

Trim Comparison

Showing of 7 trims
Standard Standard Not Available Not Available Optional Optional
 
 
 
 
Engine
Engine
 
Displacement
Displacement
 
Fuel System
Fuel System
 
Horsepower
Horsepower
 
Torque
Torque
 
Dead Weight Hitch - Max Trailer Wt.
Dead Weight Hitch - Max Trailer Wt.
 
Dead Weight Hitch - Max Tongue Wt.
Dead Weight Hitch - Max Tongue Wt.
 
Wt Distributing Hitch - Max Trailer Wt.
Wt Distributing Hitch - Max Trailer Wt.
 
Wt Distributing Hitch - Max Tongue Wt.
Wt Distributing Hitch - Max Tongue Wt.
 
Fifth Wheel Hitch - Max Trailer Wt.
Fifth Wheel Hitch - Max Trailer Wt.
 
Fifth Wheel Hitch - Max Tongue Wt.
Fifth Wheel Hitch - Max Tongue Wt.
 
Maximum Trailering Capacity
Maximum Trailering Capacity
 
Steering
Steering
 
Drivetrain
Drivetrain
 
Transmission
Transmission
 

Photos

No content available

autoTRADER Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Owner Scores

Based on 3 reviews
Comfort 9
90% Complete
Performance 10
100% Complete
Fuel Economy 9
90% Complete
Interior Design 9
90% Complete
Exterior Styling 9
90% Complete
Reliability 10
100% Complete

Owner Reviews

Tough_as_nails awesome truck June 29, 2014
Overall Score
I loved this truck. It always started and never stranded me anywhere in the four years that I owned it. It had lots of power and handled great, was a beautiful dark blue and sounded amazing with dual magnaflow exhaust. It had over 250,000 km and ran like it was still new. It never died once until it was written off now Im getting a 2010 crew max and I'm jacked about it.
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 10
100% Complete
Interior Design 10
100% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete
View all owner reviews

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2019-523
Recall date
2019-10-17
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006
Manufacturer Recall Number:
SRC R90 / SRC R91
Units Affected:
37,591
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional Note: Vehicles may have had the original front passenger airbag inflator replaced as a “like-for-like” replacement under recall 2016-103 (Toyota Recall #'s SRC 241 & SRC 242) as a temporary remedy while evaluating a permanent remedy. These vehicles will receive the permanent remedy passenger airbag assembly under this recall.
Recall number
2016-103
Recall date
2016-03-02
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006
Manufacturer Recall Number:
SRC241 & SRC242
Units Affected:
400,124
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes recalls 2013113, 2014224, 2015197 and 2015269. Correction: All vehicles having not received a replacement inflator as part of the previous recall will now have a replacement inflator installed by dealers. For Matrix model vehicles, dealers may replace the front passenger airbag assembly with one equipped with a newly specified inflator.
Recall number
2015-269
Recall date
2015-06-17
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006
Manufacturer Recall Number:
SSC241 & SSC242
Units Affected:
366,860
Notification Type:
Superseded
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. Click here for more information
Recall number
2007-014
Recall date
2007-01-19
System affected
Steering
Model year(s) affected
2004 2005 2006
Manufacturer Recall Number:
707
Units Affected:
11,298
Notification Type:
Safety TC
On certain vehicles, a manufacturing issue with the front lower ball joint could result in premature wear. If the vehicle is operated for an extended period of time in this condition, the ball joint may eventually experience excessive wear and looseness, resulting in increased steering effort, reduced vehicle self-centering and noise in the front suspension. In extreme cases, when the driver continues to operate the vehicle in this condition, the lower ball joint may separate from the knuckle causing a loss of vehicle steering control. Correction: Dealers will inspect and, if necessary, replace the front lower ball joints.

Similar Vehicles

Select Another Vehicle
Search now