2004 Toyota Sequoia - Prices, Trims, Options, Specs, Photos, Reviews, Deals | autoTRADER.ca

2004 Toyota Sequoia

Canadian MSRP

$53,770 - $63,620

Owner Score
2004 Toyota Sequoia

Key Specifications for 2004 Toyota Sequoia

Fuel Economy 12.6 - 16.9 City/HWY combined
Horsepower 240 hp
Drivetrain Four Wheel Drive
Engine FuelSystemGasoline
Torque 315 ft-lb
Seats 8

Trim Comparison

Standard Not Available Optional
4dr SR5 V8 4WD
4dr Limited V8 4WD
4dr SR5 V8 4WD
4dr Limited V8 4WD
 
MSRP
53,770
MSRP
63,620
 
 
Gas V8
Gas V8
 
 
4.7L/285
4.7L/285
 
 
SMPI
SMPI
 
 
240 hp @ 4800 rpm
240 hp @ 4800 rpm
 
 
315 ft-lb @ 3400 rpm
315 ft-lb @ 3400 rpm
 
 
Power Steering
Power Steering
 
 
Four Wheel Drive
Four Wheel Drive
 
 
4-speed automatic transmission w/OD-inc: lock-up torque converter, overdrive cancel switch
4-speed automatic transmission w/OD-inc: lock-up torque converter, overdrive cancel switch
 
 
Gasoline
Gasoline
 
 
16.9 L/100 km
16.9 L/100 km
 
 
12.6 L/100 km
12.6 L/100 km
 
 
12.6 - 16.9 L/100 km
12.6 - 16.9 L/100 km
 
 
100.0 L
100.0 L
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4 Wheel Disc
4 Wheel Disc
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
8 N/A
8 N/A
 
 
1026 mm
1026 mm
 
 
1057 mm
1057 mm
 
 
1577 mm
1577 mm
 
 
986 mm
986 mm
 
 
983 mm
983 mm
 
 
1580 mm
1580 mm
 
 
937 mm
937 mm
 
 
757 mm
757 mm
 
 
1547 mm
1547 mm
 
 
N/A
N/A
 
 
N/A
N/A
 
 
2084 L
2084 L
 
 
787 L
787 L
 
 
 
 
 
 
3000 mm
3000 mm
 
 
5179 mm
5179 mm
 
 
1981 mm
1981 mm
 
 
1869 mm
1925 mm
 
 
269 mm
269 mm
 
 
2390 kg
2402 kg
 
 
P265/70R16
P265/65R17
 
 
P265/70R16
P265/65R17
 
 
 
 
 
 
 
 
 
 
 
 

Photos

No content available

autoTRADER Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Owner Scores

Based on 2 reviews
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 6
60% Complete
Interior Design 10
100% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete

Owner Reviews

Espee It's an amazing ride if you don't care for gas March 16, 2013 SR5
Overall Score
I mean, you can try your best to follow tips and suggestions to get the most fuel efficiency from your vehicle, but it's a v8, how much resistance can you have from revving it high here and there? But other than that, it's flawless. Owned since 2006, not once did I have a major problem yet. (Hopefully doesn't change) Very spacious, and a smooth ride, for the amount I put down I was very satisfied with my purchase.
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 6
60% Complete
Interior Design 10
100% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete
View all owner reviews

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2005151
Recall date
2005-05-18
System affected
Suspension
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
511
Units Affected:
14,341
Notification Type:
Safety Mfr
On certain vehicles, a manufacturing issue with the front lower ball joint could result in premature wear. If the vehicle is operated for an extended period of time in this condition, the ball joint may eventually experience excessive wear and looseness, resulting in increased steering effort, reduced vehicle self-centering and noise in the front suspension. In extreme cases, when the driver continues to operate the vehicle in this condition, the lower ball joint may separate from the knuckle causing a loss of vehicle steering control. Correction: Dealers will inspect and, if necessary, replace the front lower ball joints.
Recall number
2007014
Recall date
2007-01-19
System affected
Steering
Model year(s) affected
2004 2005 2006 2007
Manufacturer Recall Number:
707
Units Affected:
11,298
Notification Type:
Safety TC
On certain vehicles, a manufacturing issue with the front lower ball joint could result in premature wear. If the vehicle is operated for an extended period of time in this condition, the ball joint may eventually experience excessive wear and looseness, resulting in increased steering effort, reduced vehicle self-centering and noise in the front suspension. In extreme cases, when the driver continues to operate the vehicle in this condition, the lower ball joint may separate from the knuckle causing a loss of vehicle steering control. Correction: Dealers will inspect and, if necessary, replace the front lower ball joints.
Recall number
2015197
Recall date
2015-05-13
System affected
Airbag
Model year(s) affected
2003 2004
Manufacturer Recall Number:
SSC 241
Units Affected:
4,407
Notification Type:
Superseded
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. Click here for more information
Recall number
2015269
Recall date
2015-06-17
System affected
Airbag
Model year(s) affected
2002 2003 2004 2005 2006 2007
Manufacturer Recall Number:
SSC241 & SSC242
Units Affected:
366,860
Notification Type:
Superseded
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. Click here for more information
Recall number
2016103
Recall date
2016-03-02
System affected
Airbag
Model year(s) affected
2002 2003 2004 2005 2006 2007
Manufacturer Recall Number:
SRC241 & SRC242
Units Affected:
400,124
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes recalls 2013113, 2014224, 2015197 and 2015269. Correction: All vehicles having not received a replacement inflator as part of the previous recall will now have a replacement inflator installed by dealers. For Matrix model vehicles, dealers may replace the front passenger airbag assembly with one equipped with a newly specified inflator.
Recall number
2019523
Recall date
2019-10-17
System affected
Airbag
Model year(s) affected
2002 2003 2004 2005 2006 2007
Manufacturer Recall Number:
SRC R90 / SRC R91
Units Affected:
37,591
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional Note: Vehicles may have had the original front passenger airbag inflator replaced as a “like-for-like” replacement under recall 2016-103 (Toyota Recall #'s SRC 241 & SRC 242) as a temporary remedy while evaluating a permanent remedy. These vehicles will receive the permanent remedy passenger airbag assembly under this recall.

Similar Vehicles

Select Another Vehicle
Search now