2008 Toyota Highlander

Canadian MSRP
$34,900 - $45,150
2008 Toyota Highlander

Key Specifications for 2008 Toyota Highlander

Fuel Economy 8.8 - 12.3 City/HWY combined
Horsepower 270 hp
Drivetrain Four-Wheel Drive
Engine Gasoline
Torque 248 ft-lb
Seats 7
 

Review & Compare:
2008 Toyota Highlander Trims

The 2008 Toyota Highlander has 4 trims. Below you will be able to review all the trims with the option to compare.
4 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2021-723
Recall date
2021-11-24
System affected
Accessories
Model year(s) affected
2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019
Manufacturer Recall Number:
SRC XC8/XC9 / SRC RC8/RC9 / SRC RD1/RD2
Units Affected:
51,373
Notification Type:
Safety Mfr
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Recall number
2015-493
Recall date
2015-10-21
System affected
Electrical
Model year(s) affected
2008 2009 2010 2011
Manufacturer Recall Number:
SRC R10
Units Affected:
315,091
Notification Type:
Safety Mfr
On certain vehicles, inconsistent application of grease during the manufacturing process could cause the driver's side power window master switch to stick or become inoperative due to electrical contact point wear. This could cause debris to accumulate between the contact points, potentially resulting in an electrical short circuit. If a short circuit occurs, the switch assembly may overheat, produce smoke, melt and/or potentially lead to a fire causing injury and/or property damage. Correction: Dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary. Note: This is an expansion of recall 2012-338.
Recall number
2014-124
Recall date
2014-04-09
System affected
Airbag
Model year(s) affected
2008 2009 2010
Manufacturer Recall Number:
SSC234
Units Affected:
344,870
Notification Type:
Safety TC
On certain vehicles, electrical circuitry in the steering wheel assembly may become damaged. As a result, the driver's airbag may not function as intended, causing the instrument panel airbag warning lamp to illuminate. Failure of the driver's airbag to deploy during a crash (where deployment is warranted) could increase the risk of injury to the seat occupant. Correction: Dealers will replace the spiral cable assembly.
Recall number
2012-338
Recall date
2012-10-10
System affected
Electrical
Model year(s) affected
2008
Manufacturer Recall Number:
177
Units Affected:
239,459
Notification Type:
Safety TC
On certain vehicles, due to improperly applied grease, the driver's side power window master switch could stick or become inoperative. If attempts are made to lubricate the switch, the switch assembly could overheat and melt. A melting switch may produce smoke and potentially lead to a fire causing property damage and/or personal injury. Correction: Dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary.
Recall number
2011-168
Recall date
2011-04-21
System affected
Airbag
Model year(s) affected
2008
Manufacturer Recall Number:
SSC 142
Units Affected:
25,000
Notification Type:
Safety Mfr
On certain vehicles, the roll angle sensors in the airbag sensor assembly could fail. If one of the roll angle sensors malfunctions, the airbag warning lamp will illuminate, the roll detection system will be suspended, and the curtain shield airbag will not deploy during a roll-over crash (where deployment is warranted), thereby increasing the risk of personal injuries to the seat occupant. The airbag system, however, will continue to detect frontal and lateral impacts and, in those instances, will function as designed. If both roll angle sensors fail nearly simultaneously after starting the vehicle, the curtain shield airbag and the seatbelt pretensioner could inadvertently deploy. Inadvertent curtain shield airbag deployment in a non-impact situation may cause damage to the surrounding vehicle environment and create expensive vehicle repair, including replacement of the curtain shield airbag module and the airbag electronic control unit. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants. Correction: Dealers will replace the airbag sensor assembly.
Recall number
2010-124
Recall date
2010-04-19
System affected
Accessories
Model year(s) affected
2008 2009 2010
Manufacturer Recall Number:
097
Units Affected:
46,923
Notification Type:
Safety Mfr
On certain vehicles, if the Toyota optional accessory "tray-type" floor mat is not secured by the retaining hooks, or if it is placed on top of an existing floor mat, the "tray-type" floor mat could move forward and interfere with the accelerator pedal. This could result in a crash causing property damage, personal injury or death. Correction: The manufacturer will notify owners to remove the "tray-type" floor mat and provide instructions on how to obtain a reimbursement.
Recall number
2009-290
Recall date
2009-10-07
System affected
Other
Model year(s) affected
2008 2009 2010
Manufacturer Recall Number:
011, 014, 030, 093, 083, 041, 084, 086, 081, 088
Units Affected:
437,445
Notification Type:
Safety TC
On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death. Correction: Dealers will reconfigure the shape of the accelerator pedal. Certain models will also have the shape of the floor underneath the accelerator pedal modified and/or a brake override system installed.
Recall number
2008-308
Recall date
2008-08-27
System affected
Seats And Restraints
Model year(s) affected
2008
Manufacturer Recall Number:
Units Affected:
6,963
Notification Type:
Service Campaign Mfr
On certain vehicles, during the installation of an infant seat on the 3rd row seat, the seatbelt mechanism might revert back to the Emergency Locking Retractor (ELR) mode vs. an Automatic Locking Retractor (ALR) mode. Toyota has initiated a Customer Support program to provide replacement parts to prevent the ALR from reverting to ELR mode. Correction: Dealers will install a newly designed seatbelt component free of charge.

Similar Vehicles

Select Another Vehicle
Search now