2011 Nissan Juke

On certain vehicles, the fuel pressure sensor may not have been tightened properly when the corrective measure of recall 2012-074 was performed. As a result, the fuel pressure sensor may loosen over time, which could cause a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: Dealers will inspect and retighten the fuel pressure sensor as necessary.

On certain vehicles, the fuel pressure sensor connected to the engine fuel delivery rail may not have been sufficiently tightened during vehicle assembly.  Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and the rail.  Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury.  Correction: Dealers will inspect the pressure sensor and tighten to specification.  Note:  This is an expansion of recall 2012-074.  Vehicles that were repaired under the previous campaign are not affected because that remedy would have corrected the subject condition.

On certain vehicles, the fuel pressure sensor connected to the engine fuel delivery rail may not have been sufficiently tightened during vehicle assembly.  Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and rail.  Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury.  Correction: Dealers will inspect for fuel leakage from the pressure sensor and the fuel rail.  If there are no signs of a fuel leak, the fuel pressure sensor will be tightened to specifications.  If a fuel leak is confirmed, the gasket between the sensor and the fuel delivery rail will be replaced, and the sensor will be tightened.

On certain vehicles, a weld at the boost sensor bracket may fail, allowing the bracket to separate from the air inlet tube.  If this occurred, the engine would enter fail-safe driving mode, resulting in reduced motive power in which the vehicle could still be driven for short distances.  Continued operation could cause the engine to stall which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury.  Correction: Dealers will inspect and, if necessary, replace the air inlet tube assembly.