2008 Honda Ridgeline

Issue: 
On certain vehicles, the rear frame could rust where the fuel tank and rear subframe are mounted. If this happens, the fuel tank and/or rear subframe mounts could separate from the frame. This can allow the fuel tank to fall and become damaged, which could cause a fuel leak. 

Safety Risk: 
A fuel leak can create the risk of a fire. 

Corrective Actions: 
Honda will notify owners by mail and instruct you to take your vehicle to a dealership to inspect the rear frame for corrosion. Depending on the outcome of the inspection, the dealer will either apply corrosion protection and install a support brace, or repair the frame. Honda will offer to repurchase vehicles that do not pass the inspection.

Issue: 
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. 
Note: This is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall.
 
Safety Risk: 
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. 
 
Corrective Action: 
Owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator. 
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect/replace the driver's frontal airbag inflator. Note:  Honda Canada has created a special Airbag Inflator Hotline for immediate assistance.  For more information, please contact: 

For Honda Owners: 1-877-445-7754
For Acura Owners: 1-877-445-9844

On certain vehicles, the hole in the sheetmetal front bulkhead that serves as the base and pivot point for the hood support rod may not have been punched to specifications during the manufacturing process.   If the hood support rod hole fails, the hood could fall, potentially injuring someone working in the engine compartment.  Note:  All vehicles were inspected before retail sale.  None were found to be out of specification.