Honda Odyssey in Canada - Canadian Prices, Trims, Specs, Photos, Recalls | AutoTrader.ca

Honda Odyssey

Honda Odyssey

Photos

Reviews and News

View All Articles

Owner Scores

Based on 178 reviews
Comfort 9
90% Complete
Performance 9
90% Complete
Fuel Economy 8
80% Complete
Interior Design 9
90% Complete
Exterior Styling 9
90% Complete
Reliability 9
90% Complete

Owner Reviews

Cdnulsterman Great comfort but shame about its electric doors December 28, 2020 EX
Overall Score
Bought our Oddy used with high hopes of that great Honda reliability. Very comfortable, great driving experience with more cup holders than you could ever dream of. Not even 7 months of ownership and the electric door cable snapped, thankfully was able to force it closed. Took it to the dealership and was told that it would be $1500 to fix, said it was wear and tear. Very frustrating as this should not fail on a 2.5 year old minivan. Contacted Honda Canada who got a 50% discount for us. They said we should have taken extended warranty... Would expect this on a dodge minivan.
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 8
80% Complete
Interior Design 10
100% Complete
Exterior Styling 10
100% Complete
Reliability 2
20% Complete
View all owner reviews

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2021-182
Recall date
2021-03-26
System affected
Fuel Supply
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
80,176
Notification Type:
Safety Mfr
Issue: On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: This is an expansion of Transport Canada Recall No. 2020-236. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump motor.
Recall number
2021-012
Recall date
2021-01-19
System affected
Fuel Supply
Model year(s) affected
2018 2019 2020
Manufacturer Recall Number:
Units Affected:
25
Notification Type:
Safety Mfr
Issue: On certain vans converted for wheelchair access by BraunAbility, the fuel tank can be overfilled and fuel can enter the charcoal canister. If this happens, fuel can leak from the canister onto nearby components and the ground. Note: This problem only affects Honda Odyssey wheelchair vans with a power infloor side-entry ramp, which were altered between September 13, 2018 and December 3, 2020. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: BraunAbility will notify owners by mail and instruct you to take your vehicle to a BraunAbility service center for an inspection. If there is evidence of a fuel leak, the dealer will install a new fuel tank assembly that has a different fill limit vent valve. The dealer will also replace the charcoal canister. A warning label will be applied on or near the fuel filler neck advising you not to overfill or "top off" the fuel tank.
Recall number
2020-346
Recall date
2020-07-28
System affected
Visual System
Model year(s) affected
2019 2020
Manufacturer Recall Number:
Units Affected:
41,871
Notification Type:
Compliance Mfr
Issue: On certain vehicles, a software problem could cause a delay or prevent the rearview camera image from displaying. Canadian regulations require the rearview image to display within 2 seconds of shifting the transmission into reverse gear. Safety Risk: A rearview camera image that is delayed or that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Honda will notify owners by mail and include instructions on how to download and install a software update to correct this problem. Alternatively, an owner can take their vehicle to a dealer to have the software update installed.
Recall number
2020-344
Recall date
2020-07-28
System affected
Visual System
Model year(s) affected
2018 2019 2020
Manufacturer Recall Number:
Units Affected:
53,772
Notification Type:
Compliance Mfr
Issue: On certain vehicles, there is a programming error in the instrument panel control module. This could cause the instrument panel not display certain information, such as the vehicle speed, engine oil pressure, and gear selector position. This can also cause the rearview camera image not to display. Safety Risk: An instrument panel that does not work or a rearview camera image that does not display could increase the risk of a crash. Corrective Actions: Honda will notify owners by mail and instruct you to take your vehicle to a dealer to reprogram the instrument panel control module.
Recall number
2020-343
Recall date
2020-07-29
System affected
Structure
Model year(s) affected
2018 2019 2020
Manufacturer Recall Number:
Units Affected:
20,379
Notification Type:
Safety Mfr
Issue: On certain vehicles, moisture can freeze in the door handle cables for the rear sliding doors. If this happens, the door handle could stick in the open position. This can cause the door not latch properly when it is closed. As a result, the door could open while driving. Safety Risk: A door that opens while driving could create a risk of injury. Corrective Actions: Honda will notify owners by mail and instruct you to take your vehicle to a dealer to replace the cables for the outer handles on the power sliding doors.
Recall number
2020-042
Recall date
2020-02-06
System affected
Seats And Restraints
Model year(s) affected
2018 2019 2020
Manufacturer Recall Number:
Units Affected:
17,228
Notification Type:
Safety Mfr
Issue: On certain vehicles, the wiring for the accessory power outlet located near the third-row seat could get pinched. This could result in a short circuit, and cause overheating of the wiring harness. Safety Risk: Wiring that overheats could create the risk of a fire. Corrective Actions: Honda will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the wire harness for the third-row seat accessory power outlet. If it is damaged, it will be replaced. If no damage is found, the wire harness will be wrapped with protective tape and re-routed.
Recall number
2020-015
Recall date
2020-01-17
System affected
Airbag
Model year(s) affected
2000 2001
Manufacturer Recall Number:
Units Affected:
85,247
Notification Type:
Safety Mfr
Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: This recall is for airbag inflators that may have been installed when the vehicle had the steering wheel airbag replaced. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.
Recall number
2020-014
Recall date
2020-01-17
System affected
Airbag
Model year(s) affected
1998 1999 2000
Manufacturer Recall Number:
Units Affected:
198,995
Notification Type:
Safety Mfr
Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.
Recall number
2019-323
Recall date
2019-06-28
System affected
Airbag
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
Units Affected:
222,662
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Note: This is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2019-180
Recall date
2019-04-11
System affected
Powertrain
Model year(s) affected
2018 2019
Manufacturer Recall Number:
N88
Units Affected:
6,540
Notification Type:
Safety Mfr
Issue: On certain vehicles, a low-voltage condition caused by a loose battery connection or a low battery could cause a problem with the Transmission Control Module (TCM). If this happens, the transmission could shift to Park (P) while driving. This could cause damage to the transmission park pawl. As a result, when the transmission is shifted to P, the vehicle could move if the parking brake is not applied. Safety Risk: A damaged transmission could allow a parked vehicle to move if the parking brake is not applied. This could increase the risk of a crash. Corrective Actions: Honda will mail a letter to owners asking them to take their vehicle to a Honda Automobile dealer. The dealer will ensure the battery terminals are secure and update the TCM with the latest software. If the parking gear cannot hold the vehicle in Park without application of the electronic parking brake, the transmission will be replaced.
Recall number
2019-179
Recall date
2019-04-11
System affected
Engine
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
9,834
Notification Type:
Safety Mfr
Issue: On certain vehicles, the teeth on the timing belt may separate due to a manufacturing issue. This could result in an engine stall. Safety Risk: An engine stall could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the lot number on the timing belt. If it is within the affected range, the belt will be replaced. Additionally, dealers will inspect the engine for internal damage.
Recall number
2019-117
Recall date
2019-03-07
System affected
Airbag
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
Units Affected:
83,977
Notification Type:
Safety Mfr
Issue: On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: This recall only affects certain vehicles that had a Takata airbag inflator installed during a previous airbag recall or collision repair. Safety Risk: In a crash where the airbag deploys, there could be an increased risk of injury. Corrective Action: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.
Recall number
2018-622
Recall date
2018-11-13
System affected
Structure
Model year(s) affected
2018
Manufacturer Recall Number:
HN63
Units Affected:
11,252
Notification Type:
Safety Mfr
On certain vehicles, the rear latch assemblies on the power sliding doors may stick. This could cause a door not to close fully, and in certain circumstances, the door may open unexpectedly while the vehicle is in motion. This could create a risk of injury to the occupants. Correction: Dealers will replace the rear latch assemblies on both sliding doors. In the interim, until vehicles can be completely repaired, dealers will disable the power opening and closing functions to prevent a door from opening unexpectedly.
Recall number
2018-602
Recall date
2018-11-01
System affected
Brakes
Model year(s) affected
2018 2019
Manufacturer Recall Number:
Units Affected:
7,440
Notification Type:
Compliance Mfr
Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 135 - Light Vehicle Brake Systems. A problem with the rear brake system may cause gas bubbles to form in the brake fluid. This could cause a soft brake pedal feel and a reduction in brake performance, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will bleed the rear brakes.
Recall number
2018-128
Recall date
2018-03-13
System affected
Seats And Restraints
Model year(s) affected
2014 2015
Manufacturer Recall Number:
HN35
Units Affected:
22,056
Notification Type:
Safety Mfr
On certain vehicles, the seat recliner mechanism for the second row left (driver’s) side seat may have a manufacturing error. If the second row left side seat walk-in feature (which folds the seatback and slides the seat forward for access to the third row) is operated while the seat is in the full recline position, the recliner cam could over rotate. When the seatback is returned to an upright position, there is a potential for the seatback to stay in unlocked position or unexpectedly unlock without engaging the lever. In the event of crash, an unlocked seatback could increase the risk of injury to the seat occupant. Correction: Dealers will test the seat to confirm proper operation. If the seat recliner is found to be operating properly, a stopper bracket (which limits the rotation of the cam) will be installed on the seat recliner mechanism. In cases where the seatback does not function properly, dealers will replace the seatback frame assembly and a stopper bracket will be installed and proper operation will be verified.
Recall number
2017-567
Recall date
2017-11-17
System affected
Seats And Restraints
Model year(s) affected
2011 2012 2013 2014 2015 2016 2017
Manufacturer Recall Number:
HN24
Units Affected:
69,839
Notification Type:
Safety Mfr
On certain vehicles, the rear outboard strikers of the second row outboard (outer) seats have a collar to define two set positions. If an outboard seat is positioned over the collar while attaching the seat to the vehicle floor, the seat will not latch properly to the striker. An unlatched second row outboard seat could tip forward during moderate to heavy braking, which could increase the risk of injury to the seat occupant. Correction: Dealers will install a second row seat striker bracket and a warning label on both second row outer seats. Additionally, dealers will also place supplemental owner information cards in the glove box.
Recall number
2017-317
Recall date
2017-06-27
System affected
Seats And Restraints
Model year(s) affected
2018
Manufacturer Recall Number:
HN15
Units Affected:
417
Notification Type:
Compliance Mfr
Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts. During vehicle assembly, an outer seat belt position seat belt tongue may have been incorrectly installed onto the third row seating centre seat belt assembly. This would result in the seat belt tongue not latching when inserted in the centre seat belt buckle, and therefore would be non-compliant with the standard. In the event of a crash, an unlatched seatbelt may increase the risk of injury to the seat occupant. Correction: Dealers will inspect the third row centre seat belt for the correct tongue and replace as necessary.
Recall number
2016-645
Recall date
2016-12-20
System affected
Seats And Restraints
Model year(s) affected
2011 2012 2013 2014 2015 2016
Manufacturer Recall Number:
HM95
Units Affected:
52,710
Notification Type:
Safety Mfr
On certain vehicles, the lever on the second row outboard seats, which allows access to the third row seat, may stay in the unlocked position after returning the seat to its normal seating position. An unlocked second row outboard seat could increase the risk of injury to the seat occupant in the event of a crash. Correction : Dealers will install an additional bracket and spring to the second row outboard seat adjuster to ensure proper engagement of the walk-in lever.
Recall number
2016-644
Recall date
2016-12-20
System affected
Seats And Restraints
Model year(s) affected
2016
Manufacturer Recall Number:
HM97
Units Affected:
124
Notification Type:
Compliance Mfr
Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 207 - Anchorage of Seats. Due to a manufacturing error, the seat adjustment bar that controls the second row centre seat slide function may stick in the unlocked position, allowing the seat to slide freely and fail to meet the requirements of the standard. An unlocked second row centre seat may increase the risk of injury to the seat occupant in the event of a crash. Correction: Dealers will inspect the slide function for the second row centre seat and repair/replace the seat adjustment bar if necessary.
Recall number
2016-249
Recall date
2016-05-24
System affected
Airbag
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
Units Affected:
28,929
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2015-598
Recall date
2015-12-18
System affected
Label
Model year(s) affected
2011 2012 2013 2014 2015
Manufacturer Recall Number:
Units Affected:
50,551
Notification Type:
Inconsequential
Certain vehicles may not comply with Canadian Motor Vehicle Safety Regulations. The compliance label may bear incorrect rear Gross Axle Weight Rating (GAWR) information (lower than the vehicle's actual rear GAWR). Correction: A production change has been undertaken to remedy this technical non-compliance condition. No corrective recall action is required as the technical non-compliance conditions are deemed to be non-safety related.
Recall number
2015-225
Recall date
2015-05-27
System affected
Airbag
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
Units Affected:
704,770
Notification Type:
Safety Mfr
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2014567. Correction: Dealers will inspect/replace the driver’s frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2015-036
Recall date
2015-01-28
System affected
Airbag
Model year(s) affected
2003 2004
Manufacturer Recall Number:
K85 / M22
Units Affected:
28,150
Notification Type:
Safety Mfr
On certain vehicles, a defect in the supplemental restraint system (SRS) could result in an inadvertent deployment of the front airbag(s) and/or seatbelt pretensioner(s). Unintended seatbelt pretensioner and/or airbag deployment, in a non-warranted (non-impact) situation, could startle the driver, which could result in a vehicle crash causing property damage and/or personal injury. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants. Correction: Dealers will replace the SRS control unit and may install an in-line jumper wiring harness to correct the issue. Note: This recall supersedes recall 2013315. Vehicles that were repaired under the previous campaign will also need to be repaired under this campaign.
Recall number
2014-567
Recall date
2014-12-15
System affected
Airbag
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
Units Affected:
704,770
Notification Type:
Superseded
Honda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: Click here for more information
Recall number
2014-242
Recall date
2014-06-20
System affected
Airbag
Model year(s) affected
2002 2003
Manufacturer Recall Number:
H-2-14
Units Affected:
168,968
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This recall is an expansion of recall 2013111. Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2014-116
Recall date
2014-04-07
System affected
Airbag
Model year(s) affected
2014
Manufacturer Recall Number:
HM00
Units Affected:
1,501
Notification Type:
Safety Mfr
On certain vehicles, the front passenger side curtain airbag electrical connector may have been damaged at time of assembly, which could illuminate the airbag warning lamp and potentially deactivate the airbag. Failure of the front passenger side curtain airbag to deploy during a crash (where deployment is warranted) could increase the risk of injury to the seat occupant. Correction: Dealers will inspect the connector and affect repairs as necessary.
Recall number
2014-076
Recall date
2014-03-14
System affected
Fuel Supply
Model year(s) affected
2005 2006 2007 2008 2009 2010
Manufacturer Recall Number:
HL99
Units Affected:
63,328
Notification Type:
Safety Mfr
On certain vehicles, the fuel pump strainer could deteriorate and crack. This could result in a fuel smell and/or fuel leak. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: Dealers will replace the fuel strainer cover.
Recall number
2013-381
Recall date
2013-11-04
System affected
Brakes
Model year(s) affected
2007 2008
Manufacturer Recall Number:
Units Affected:
24,692
Notification Type:
Safety TC
On certain vehicles, due to a defect in the Vehicle Stability Assist (VSA) system, the brakes may apply unexpectedly while the vehicle is being driven without the driver pressing on the brake pedal. If this were to occur, the brake lamps would also fail to illuminate. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will affect repairs.
Recall number
2013-315
Recall date
2013-09-19
System affected
Airbag
Model year(s) affected
2003 2004
Manufacturer Recall Number:
Units Affected:
28,150
Notification Type:
Safety Mfr
On certain vehicles, a defect in the supplemental restraint system could result in an inadvertent deployment of the front airbags. Unintended airbag deployment, in a non-warranted (non-impact) situation, could startle the driver, which could result in a vehicle crash causing property damage and/or personal injury. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants. Correction: Dealers will install an electrical noise suppressor unit.
Recall number
2013-114
Recall date
2013-04-10
System affected
Other
Model year(s) affected
2012 2013
Manufacturer Recall Number:
Honda E-1-13, Acura E-2-13
Units Affected:
20,763
Notification Type:
Safety Mfr
On certain vehicles, the brake-shift interlock may not function properly at low temperatures. This could allow the transmission gear shift lever to be moved out of the PARK position without depressing the brake pedal. Depending which gear the driver selects, the vehicle could begin to move forward or backward immediately. This movement could result in property damage, or cause the vehicle to strike a bystander, potentially resulting in personal injury. Correction: Dealers will replace the gear shift assembly stopper.
Recall number
2013-111
Recall date
2013-04-10
System affected
Airbag
Model year(s) affected
2002
Manufacturer Recall Number:
H-2-13
Units Affected:
107,786
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2013-018
Recall date
2013-01-18
System affected
Airbag
Model year(s) affected
2011 2012 2013
Manufacturer Recall Number:
HL66
Units Affected:
44,762
Notification Type:
Safety Mfr
On certain vehicles, the airbag cover may not have been adequately secured to the driver’s airbag module. As a result, the airbag may deploy with an irregular shape, or the cover may detach during deployment. Failure of the airbag to deploy in the designed manner during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the driver’s airbag module.
Recall number
2012-415
Recall date
2012-12-10
System affected
Powertrain
Model year(s) affected
2003 2004
Manufacturer Recall Number:
AK60, HL65
Units Affected:
52,441
Notification Type:
Safety TC
On certain vehicles, the ignition interlock blocking mechanism could become damaged if excessive force is applied to the ignition key. If this occurs, it may become possible for the driver to remove the ignition key when the gear selector is in a position other than the Park position. This could allow the vehicle to roll away, increasing the risk of a crash causing personal injury and/or damage to property. Correction: Dealers will install an updated ignition interlock lever and replace the ignition lock cylinder if necessary.
Recall number
2012-059
Recall date
2012-02-16
System affected
Other
Model year(s) affected
2008 2009
Manufacturer Recall Number:
HL42
Units Affected:
2,790
Notification Type:
Safety Mfr
On certain vehicles equipped with a power liftgate system, the gas-filled struts (which help to raise and support the liftgate) may be prone to early life failures due to a manufacturing flaw. This could allow the liftgate to drop suddenly, placing anyone beneath or near the gate at risk of personal injury. Correction: Dealers will replace both liftgate struts.
Recall number
2011-419
Recall date
2011-12-05
System affected
Airbag
Model year(s) affected
2002 2003
Manufacturer Recall Number:
HL32, HL31, HL33, HL34, AK43, AK45
Units Affected:
26,964
Notification Type:
Safety Mfr
On certain vehicles, the driver's airbag inflator could produce excessive internal pressure. If an affected airbag deploys, the increased internal pressure may cause the inflator to rupture and metal fragments could pass through the airbag cushion material and cause injury to vehicle occupants. Correction: Dealers will replace airbag inflator.
Recall number
2011-120
Recall date
2011-03-17
System affected
Visual System
Model year(s) affected
2011
Manufacturer Recall Number:
HL14
Units Affected:
2,908
Notification Type:
Safety Mfr
On certain vehicles, if the wiper blades become frozen to the windshield, and the wiper motor is switched ON, one of the wiper rods could bend or separate from the motor (due to insufficient stiffness of the rod). Loss of windshield wiping capability, should it occur during a rainy/snowy day, may compromise the driver's ability to see the road and its users, which could result in a crash causing property damage and/or personal injury. Correction: Dealers will replace the windshield wiper rod.
Recall number
2010-364
Recall date
2010-10-22
System affected
Brakes
Model year(s) affected
2005 2006 2007
Manufacturer Recall Number:
HL06, AK34
Units Affected:
34,360
Notification Type:
Safety Mfr
On certain vehicles, a seal in the brake master cylinder may be susceptible to damage which can result in a leak if certain conditions exist. The polymer content affects the amount of lubrication the brake fluid provides to brake system components that are exposed to brake fluid. If the brake fluid is replaced with a low polymer brake fluid, and the brake fluid is subsequently subjected to a manual brake fluid bleeding procedure, as opposed to an automated brake bleed procedure, it is possible for the seal at the end of the brake master cylinder primary circuit to become twisted within its retention groove. If this seal becomes twisted, it can result in a leak of a small amount of brake fluid each time the brake pedal is applied. Should a leak occur, after some time the driver will be alerted by the illumination of the low brake fluid indicator light on the meter panel before any effect on braking performance results. If the driver continues to drive the vehicle without refilling the brake fluid reservoir, the vehicle will eventually exhibit a soft or spongy brake pedal feel, requiring more stroke to achieve equivalent braking force. Eventually, if this continues un-remedied, braking performance will be affected, and will finally result in a low pedal and a loss of one braking circuit. Correction: Dealers will replace the brake master cylinder seal cup and the master power assembly if brake fluid has leaked.
Recall number
2010-079
Recall date
2010-03-16
System affected
Brakes
Model year(s) affected
2007 2008
Manufacturer Recall Number:
HK96, HK95
Units Affected:
28,827
Notification Type:
Safety TC
On certain vehicles, during the self-check process that occurs shortly after each time the engine is started, the self-diagnostic software for the Vehicle Stability Assist (VSA) brake modulator causes a condition that can allow air to enter the modulator pump. Over time, and after starting the engine numerous times, it is possible for enough air to enter the system to change the brake pedal feel and affect braking performance. Reduced braking performance could lead to a crash causing property damage, personal injury or death. Correction: Dealers will remove existing air in the brake system then apply sealant and caps to the VSA modulator to prevent air from entering the brake system.
Recall number
2010-042
Recall date
2010-02-11
System affected
Airbag
Model year(s) affected
2002
Manufacturer Recall Number:
Units Affected:
41,685
Notification Type:
Safety Mfr
On certain vehicles, the driver's airbag inflator could produce excessive internal pressure. If an affected airbag deploys, the increased internal pressure may cause the inflator to rupture and metal fragments could pass through the airbag cushion material and cause injury to vehicle occupants. Correction: Dealers will replace airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844 Update June 2016: New U.S. research shows that these Takata airbags may be at higher risk of failure. Please ensure you have this recall done if your vehicle is affected.
Recall number
2007-088
Recall date
2007-03-19
System affected
Fuel Supply
Model year(s) affected
2005
Manufacturer Recall Number:
Units Affected:
12,143
Notification Type:
Safety Mfr
On certain vehicles, a manufacturing fault with the fuel pump relay could cause the coil wire in the relay to break. If this happens, the fuel pump will not operate and the engine may not start. If the relay fails while driving, the engine may stall without warning and a crash could occur. Correction: Dealers will inspect and, if required, replace the fuel pump relay.
Recall number
2005-373
Recall date
2005-11-24
System affected
Fuel Supply
Model year(s) affected
2003 2004
Manufacturer Recall Number:
HK37
Units Affected:
4,152
Notification Type:
Safety Mfr
Certain vehicles located in Alberta, Saskatchewan, Manitoba and the Yukon may experience a combination of extreme low temperatures and very rough road conditions, causing a crack in the fuel sending unit flange. At this time, vehicles located in other parts of the country are not experiencing this type of failure, therefore no action will be undertaken by the manufacturer in unaffected provinces and territories. A cracked flange could allow fuel to leak which, in the presence of an ignition source, could result in a fire. Correction: Dealers will replace the fuel sending unit.
Recall number
2005-229
Recall date
2005-08-09
System affected
Airbag
Model year(s) affected
2005
Manufacturer Recall Number:
HK31
Units Affected:
5,953
Notification Type:
Safety Mfr
On certain vehicles, the front impact sensors were insufficiently sealed during manufacturing. Over time, this may allow salt-water intrusion and corrosion, which may result in a short circuit. If one or both sensors fail, the SRS indicator will illuminate. Front impact sensor failure could cause a delay in or loss of frontal airbag deployment, which can increase the risk of injury in a frontal crash. Correction: Dealers will replace both front crash sensors.
Recall number
2004-396
Recall date
2004-11-15
System affected
Brakes
Model year(s) affected
2005
Manufacturer Recall Number:
IV-13-04
Units Affected:
126
Notification Type:
Safety Mfr
On certain vehicles, a rear wheel speed sensor may not have been installed correctly, which causes the sensor to report an incorrect wheel speed to the anti-lock brake system (ABS) control unit. The on-board diagnostic system quickly identifies this error under most normal driving conditions and activates numerous warning lamps and disables the ABS. Brake application below the ABS threshold, or after ABS is disabled, is not affected. However, if brake application exceeding the ABS threshold occurs before the malfunction is detected, the ABS control unit may reduce brake force to all wheels. An unexpected loss of brake force can cause a crash. Correction: Dealers will inspect the rear wheel speed sensors. If an incorrect gap is detected, the sensor will be removed and the knuckle checked for cross-threading damage and replaced, if necessary.
Recall number
2004-314
Recall date
2004-09-01
System affected
Fuel Supply
Model year(s) affected
2004
Manufacturer Recall Number:
V-7-04
Units Affected:
3,874
Notification Type:
Safety Mfr
On certain vehicles, a small amount of water may have been left in the fuel pump electrical connector after fuel tank integrity (leak) testing at the factory. This residual water may cause the fuel pump to fail due to corrosion. If the pump stops working, the engine will stall without warning, increasing the potential for a crash. Correction: Dealers will inspect for corrosion, and if required, replace the fuel pump assembly.
Recall number
2004-143
Recall date
2004-04-23
System affected
Powertrain
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
AJ85, AJ86, HK18
Units Affected:
85,184
Notification Type:
Safety Mfr
Certain operating conditions can result in heat build-up between the countershaft and secondary shaft second gears in the automatic transmission, eventually leading to gear tooth chipping or, in very rare cases, gear breakage can occur. Gear failure could result in transmission lock-up. Correction: On vehicles with 24 000 kms or less, the dealer will update the transmission with a simple revision to the oil cooler return line to increase lubrication to second gear. On vehicles with more than 24 000 kms, the dealer will inspect the transmission to identify gears that have already experienced discoloration due to overheating. If discolouration exists, the transmission will be replaced. If discolouration is not present, the dealer will perform the revision to the oil cooler return line.
Recall number
2003-007
Recall date
2003-01-20
System affected
Fuel Supply
Model year(s) affected
2003
Manufacturer Recall Number:
HJ98
Units Affected:
1,166
Notification Type:
Safety Mfr
On certain vehicles, the fuel tank has surface imperfections that could allow fuel to leak. A fuel leak in the presence of an ignition source could result in a fire. Correction: Dealer will replace the fuel tank.
Recall number
2000-167
Recall date
2000-08-24
System affected
Lights And Instruments
Model year(s) affected
1999 2000
Manufacturer Recall Number:
Units Affected:
11,930
Notification Type:
Safety Mfr
On certain vehicles, a dash light dimmer circuit, mounted in the multiplex control unit may be damaged by heat build-up if the dimmer circuit is operated at a setting that is less than full intensity. This would cause a transistor in the module to fail resulting in loss of instrument cluster lighting. Such a condition would prevent the driver from reading the speedometer or other instruments when operating the vehicle in the dark. Correction: Multiplex unit will be replaced.
Recall number
2000-047
Recall date
2000-02-28
System affected
Electrical
Model year(s) affected
1999 2000
Manufacturer Recall Number:
Units Affected:
14,424
Notification Type:
Safety Mfr
On certain vehicles, a wire harness located within the engine compartment may be damaged by contact with a metal pipe, possibly resulting in a blown fuse. If a fuse blows, engine power, or operation of any or all electrical components, can be lost, including lights, windshield wipers, horn and the anti-lock function of the brakes. Correction: Dealers will install protective, corrugated plastic tubing over the wire harness and pipe. Any damaged wires will be repaired or replaced.
Select Another Vehicle
Search now