2010 Honda Fit

Issue: 
On certain vehicles, the paint on the front axle shafts could delaminate or become damaged by road debris. As a result the axle shaft could corrode. If this happens, the axle shafts could break and cause a loss of power to the wheels. Also, if this happens and the vehicle is parked without the parking brake applied, the vehicle could roll away.

Safety Risk: 
A loss of power to the wheels or a vehicle rollaway could increase the risk of a crash. 
 
Corrective Actions: 
Honda will notify owners by mail and instruct you to take your vehicle to a dealer to inspect, and if necessary, replace both axle shafts.

Issue: 
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. 
Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. 

Safety Risk: 
Glass that breaks in to large pieces could create a risk of injury. 
 
Corrective Actions: 
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator.

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect/replace the driver's frontal airbag inflator. Note:  Honda Canada has created a special Airbag Inflator Hotline for immediate assistance.  For more information, please contact: 

For Honda Owners: 1-877-445-7754
For Acura Owners: 1-877-445-9844

On certain vehicles, a spring in the lost motion spring assemblies in the variable valve timing and lift electronic control (VTEC) system may bind. As a result, the lost motion spring could fracture.  In the worst case parts from a broken spring could become caught in the camshaft, causing the engine to stall without the ability to be restarted.  Lost propulsion from the engine, in conjunction with traffic and road conditions, and the driver's reactions, may increase the risk of a collision causing property damage and/or personal injury.  Correction: Dealers will inspect and, if necessary, replace the four lost motion spring assemblies."