2005 Acura RL in Canada - Canadian Prices, Trims, Specs, Photos, Recalls | AutoTrader.ca

2005 Acura RL

Canadian MSRP
$69,500
2005 Acura RL

Key Specifications for 2005 Acura RL

Fuel Economy 8.4 - 12.9 City/HWY combined
Horsepower 300 hp
Drivetrain All-Wheel Drive
Engine Gasoline
Torque 260 ft-lb
Seats 5
 

Trim Comparison

Showing of 1 trims
Standard Standard Not Available Not Available Optional Optional
 
 
 
 
Engine
Engine
 
Displacement
Displacement
 
Fuel System
Fuel System
 
Horsepower
Horsepower
 
Torque
Torque
 
Steering
Steering
 
Drivetrain
Drivetrain
 
Transmission
Transmission
 

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2017-009
Recall date
2017-01-10
System affected
Airbag
Model year(s) affected
2005 2006 2007 2008
Manufacturer Recall Number:
Units Affected:
428,641
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2016-046
Recall date
2016-02-01
System affected
Airbag
Model year(s) affected
2005 2006 2007 2008 2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
269,201
Notification Type:
Safety Mfr
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect/replace the driver’s frontal airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2013-078
Recall date
2013-03-13
System affected
Brakes
Model year(s) affected
2005
Manufacturer Recall Number:
AK62, AK63, HL69
Units Affected:
7,794
Notification Type:
Safety Mfr
Certain vehicles may experience a malfunction of the Vehicle Stability Assist (VSA) system, which could apply a small amount of brake force for a fraction of a second, even if the brake pedal has not been depressed. If the driver applies the brakes during a malfunction, the VSA system may employ the brake assist feature, which would increase braking force, exceeding the driver’s intended input. In either instance, an unexpected and unnecessary brake application could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will install a partial wiring harness containing a capacitor for the VSA modulator.
Recall number
2010-364
Recall date
2010-10-22
System affected
Brakes
Model year(s) affected
2005 2006 2007
Manufacturer Recall Number:
HL06, AK34
Units Affected:
34,360
Notification Type:
Safety Mfr
On certain vehicles, a seal in the brake master cylinder may be susceptible to damage which can result in a leak if certain conditions exist. The polymer content affects the amount of lubrication the brake fluid provides to brake system components that are exposed to brake fluid. If the brake fluid is replaced with a low polymer brake fluid, and the brake fluid is subsequently subjected to a manual brake fluid bleeding procedure, as opposed to an automated brake bleed procedure, it is possible for the seal at the end of the brake master cylinder primary circuit to become twisted within its retention groove. If this seal becomes twisted, it can result in a leak of a small amount of brake fluid each time the brake pedal is applied. Should a leak occur, after some time the driver will be alerted by the illumination of the low brake fluid indicator light on the meter panel before any effect on braking performance results. If the driver continues to drive the vehicle without refilling the brake fluid reservoir, the vehicle will eventually exhibit a soft or spongy brake pedal feel, requiring more stroke to achieve equivalent braking force. Eventually, if this continues un-remedied, braking performance will be affected, and will finally result in a low pedal and a loss of one braking circuit. Correction: Dealers will replace the brake master cylinder seal cup and the master power assembly if brake fluid has leaked.
Recall number
2007-387
Recall date
2007-12-05
System affected
Steering
Model year(s) affected
2005 2006 2007 2008
Manufacturer Recall Number:
Units Affected:
1,172
Notification Type:
Safety Mfr
On certain vehicles, the power steering hose may deteriorate prematurely, causing the hose to crack and leak. Power steering fluid leakage onto a hot catalytic converter, will generate smoke and possibly lead to an under-hood fire, causing property damage and/or personal injury or death. Correction: Dealers will install an updated power steering hose.
Recall number
2007-088
Recall date
2007-03-19
System affected
Fuel Supply
Model year(s) affected
2005
Manufacturer Recall Number:
Units Affected:
12,143
Notification Type:
Safety Mfr
On certain vehicles, a manufacturing fault with the fuel pump relay could cause the coil wire in the relay to break. If this happens, the fuel pump will not operate and the engine may not start. If the relay fails while driving, the engine may stall without warning and a crash could occur. Correction: Dealers will inspect and, if required, replace the fuel pump relay.

Similar Vehicles

Select Another Vehicle
Search now