Lincoln MKX in Canada - Canadian Prices, Trims, Specs, Photos, Recalls | AutoTrader.ca

Lincoln MKX

Lincoln MKX

Explore Lincoln MKX

Photos

Reviews and News

View All Articles

Owner Scores

Based on 27 reviews
Comfort 10
100% Complete
Performance 9
90% Complete
Fuel Economy 8
80% Complete
Interior Design 10
100% Complete
Exterior Styling 9
90% Complete
Reliability 9
90% Complete

Owner Reviews

Rhawk Lots of extras November 22, 2017
Overall Score
Lots of room, front and back. Love the heated steering wheel. Seats could heat up faster and on lower back. Drives nice.
Comfort 10
100% Complete
Performance 8
80% Complete
Fuel Economy 6
60% Complete
Interior Design 8
80% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete
View all owner reviews

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2020-335
Recall date
2020-07-20
System affected
Seats And Restraints
Model year(s) affected
2016 2017 2018
Manufacturer Recall Number:
20S37
Units Affected:
4,262
Notification Type:
Safety Mfr
Issue: On certain vehicles, the wiring for the front seats could be damaged when a person uses the tilt function. As a result, certain system in the vehicle may not work properly. Depending on which wires are damaged, the occupant classification system may not work properly. This can cause the passenger airbag to not work properly in a crash. The damage could also cause the driver or passenger front airbag to deploy suddenly without a crash. Note: This recall only affects vehicles equipped with 16-way power front seats. Safety Risk: An airbag that does not deploy properly in a crash could increase the risk of injuries. A sudden airbag deployment when there is no crash could also create a risk of injury. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealer to install protective tape on the exposed edge of the cushion frames. The dealer will also inspect the wire harness and repair or replace it, as needed.
Recall number
2019-569
Recall date
2019-11-12
System affected
Electrical
Model year(s) affected
2016 2017
Manufacturer Recall Number:
19S41
Units Affected:
5,253
Notification Type:
Safety Mfr
Issue: On certain vehicles built with a 3.7-L engine, the positive battery cable may rub against the transmission shifter cable bracket. This could cause a short circuit to occur. Safety Risk: An electrical short circuit could create a fire risk. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to install a wire channel shield and protective sleeve on the battery cable.
Recall number
2019-431
Recall date
2019-08-27
System affected
Steering
Model year(s) affected
2016
Manufacturer Recall Number:
19S26
Units Affected:
8,134
Notification Type:
Safety TC
Issue: On certain vehicles, the bolts that attach the electric power steering assist motor to the steering gear may corrode and break. This could cause a loss of power steering assist. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador). Safety Risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low vehicle speeds. This could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to replace the bolts and apply a wax sealer. If one or more of the bolts are broken or missing, a new steering gear will be installed.
Recall number
2019-005
Recall date
2019-01-08
System affected
Airbag
Model year(s) affected
2006 2007 2008 2009 2010
Manufacturer Recall Number:
19S01
Units Affected:
300,898
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: This recall supersedes recalls 2016-347 (Ford Safety Improvement Program 16S26), 2017-024 (Ford Recall 17S01) and 2018-035 (Ford Recall 18S01). Vehicles repaired under the previous recalls do not require repair under this recall.
Recall number
2018-494
Recall date
2018-09-12
System affected
Structure
Model year(s) affected
2018
Manufacturer Recall Number:
18C06
Units Affected:
51
Notification Type:
Compliance Mfr
Certain vehicles may not conform to Canada Motor Vehicle Safety Standard (CMVSS) 206 - Door Lock and Door Retention Components. The bolts attaching the door striker to the vehicle body may be too short. This could result in the door opening in a crash, increasing the risk of injury. Correction: Dealers will replace all door striker bolts.
Recall number
2018-248
Recall date
2018-05-09
System affected
Other
Model year(s) affected
2007 2008 2009 2010
Manufacturer Recall Number:
Units Affected:
0
Notification Type:
Service Campaign Mfr
Certain ACDelco Advantage wheel hub spindles, manufactured by Bearing Technologies Ltd., contain a defect which may affect vehicle safety. The spindles have studs with oversized protruding shoulders that may make assembling the part difficult with certain aftermarket brake rotors (original equipment rotors are not affected). If this difficulty in assembly is not heeded, the defect may cause a vibration of the vehicle or wobbling of the wheel on which the hub is installed. If a driver does not stop the vehicle, this may lead to a loss of vehicle control. Affected parts are ACDelco Advantage wheel hub spindles, Part No. 19360602 (BR930676K), sold between November 21, 2016 and October 2, 2017. Parts manufactured with these studs have any of the following LOT codes etched on the face of the spindle: FH38, FJ38, FN38, FP38, FS38, FV38, FY38, FZ38, and HC38. These parts fit exclusively on the models listed in this notice. Correction: Bearing Tech will provide customers with a replacement ACDelco Advantage wheel spindle, Part No. 19385577 (518517). Owners should contact Bearing Tech at 800-677-3477 or send an email to recall@brgtec.com Note: This campaign is not being conducted under the requirements of the Motor Vehicle Safety Act.
Recall number
2018-035
Recall date
2018-01-17
System affected
Airbag
Model year(s) affected
2009
Manufacturer Recall Number:
18S01
Units Affected:
36,727
Notification Type:
Superseded
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional note: This recall is superseded by recall 2019005 (Ford Recall 19S01). Please see recall 2019005 for more information.
Recall number
2017-102
Recall date
2017-03-01
System affected
Airbag
Model year(s) affected
2016 2017
Manufacturer Recall Number:
17C02
Units Affected:
4,336
Notification Type:
Compliance Mfr
Certain vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts. Certain driver frontal airbag modules may have been assembled incorrectly. In the event of a crash warranting deployment of the driver's frontal airbag, the airbag may not completely fill, or the airbag cushion may detach from the airbag module, which would not protect the driver as expected, and could increase the risk of injury. Correction: Dealers will replace the driver's frontal airbag.
Recall number
2017-024
Recall date
2017-01-12
System affected
Airbag
Model year(s) affected
2006 2007 2008
Manufacturer Recall Number:
17S01
Units Affected:
155,793
Notification Type:
Superseded
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, metal fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Depending on the model, dealers will either replace the passenger frontal airbag inflator or airbag assembly. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional note: This recall is superseded by recall 2019005 (Ford Recall 19S01). Please see recall 2019005 for more information.
Recall number
2016-347
Recall date
2016-07-06
System affected
Airbag
Model year(s) affected
2007 2008 2009 2010
Manufacturer Recall Number:
16S26
Units Affected:
5,867
Notification Type:
Superseded
Ford Canada is conducting a voluntary Safety Improvement Program involving passenger airbag inflators in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States equipped with Takata airbags. Ford will replace the driver or passenger inflator on affected vehicles, depending on the vehicle involved. Owners who believe their vehicles may have been originally purchased or registered in the states of New Jersey, Delaware, District of Columbia, Maryland, Pennsylvania, Ohio, Indiana, Illinois, Virginia, West Virginia, Kentucky, Missouri, Nebraska, Kansas, Oklahoma, Arkansas, Tennessee, North Carolina, Nevada, Arizona, New Mexico, California, Texas, Louisiana, Mississippi, Alabama, Georgia, South Carolina, Florida, Hawaii, Puerto Rico or the U.S. Virgin Islands should contact a Ford dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Program is superseded by recall 2019005 (Ford Recall 19S01). Please see recall 2019005 for more information.
Recall number
2015-509
Recall date
2015-10-27
System affected
Fuel Supply
Model year(s) affected
2009 2010
Manufacturer Recall Number:
15S31
Units Affected:
20,093
Notification Type:
Safety TC
On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), corrosion may occur underneath the fuel tank mounting reinforcement brackets at the weld seam. This could result in a small hole to form in the fuel tank resulting in a fuel vapour leak or fuel leak. A malfunction indicator lamp (MIL) may illuminate, and/or fuel odour or liquid fuel may be observed. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will inspect, and if necessary, repair or replace the fuel tank. Note: This recall is an expansion of recall 2014-482.
Recall number
2014-482
Recall date
2014-10-29
System affected
Fuel Supply
Model year(s) affected
2007 2008
Manufacturer Recall Number:
14S22
Units Affected:
17,879
Notification Type:
Safety TC
On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), corrosion may occur underneath the fuel tank mounting reinforcement brackets at the weld seam. This could result in a small hole to form in the fuel tank resulting in a fuel vapour leak or fuel leak. A malfunction indicator lamp (MIL) may illuminate, and/or fuel odour or liquid fuel may be observed. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will inspect, and if necessary, repair or replace the fuel tank.
Recall number
2014-280
Recall date
2014-07-03
System affected
Powertrain
Model year(s) affected
2013 2014
Manufacturer Recall Number:
14S10
Units Affected:
8,173
Notification Type:
Safety Mfr
On certain vehicles, the right-side halfshaft retention clip may not have been fully engaged, and could allow the halfshaft to separate. If this were to occur while the vehicle is being driven, it could result in a loss of motive power. If this were to occur while the vehicle is parked on an incline without the parking brake applied, it could result in unintended vehicle movement. Both situations could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect halfshafts for full retention and affect repairs as necessary.
Recall number
2010-463
Recall date
2010-12-23
System affected
Electrical
Model year(s) affected
2011
Manufacturer Recall Number:
10S14
Units Affected:
3,243
Notification Type:
Safety Mfr
On certain vehicles, the Body Control Module (BCM) may develop an internal short. If an electrical short occurs, an overheating condition may result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the Body Control Module.
Recall number
2010-366
Recall date
2010-10-25
System affected
Other
Model year(s) affected
2011
Manufacturer Recall Number:
10C14
Units Affected:
21
Notification Type:
Compliance Mfr
Certain vehicles may have control module settings that disable the locking function for the liftgate. Technical Standards Document No. 206 S4.3 requires that that each door, including liftgates, be equipped with a locking device. Correction: Dealers will update the control modules.
Recall number
2008-236
Recall date
2008-07-03
System affected
Fuel Supply
Model year(s) affected
2008
Manufacturer Recall Number:
08S06
Units Affected:
42
Notification Type:
Safety Mfr
On certain vehicles, the fuel tank may contain a manufacturing flaw - a dimple in the bottom, at a spot weld. This dimple could result in fuel weepage or a fuel drip from the tank. A fuel leak in the presence of an ignition source could result in a fire, causing property damage, personal injury, or death. Correction: Dealers will inspect and, if a dimple is found, will replace the fuel tank.
Recall number
2007-171
Recall date
2007-05-31
System affected
Lights And Instruments
Model year(s) affected
2007
Manufacturer Recall Number:
07C18
Units Affected:
74
Notification Type:
Compliance Mfr
Certain vehicles fail to comply with requirements of CMVSS 108 - Lighting System and Retroreflective Devices. The Daytime Running Light (DRL) system is inoperable, and therefore, the vehicle may be less visible to other motorists and pedestrians during daylight hours. Normal headlamp function is not affected. Correction: Dealers will reprogram the electronic module to activate the DRL function.
Select Another Vehicle
Search now