2006 Lexus GS 300 in Canada - Canadian Prices, Trims, Specs, Photos, Recalls | AutoTrader.ca

2006 Lexus GS 300

Canadian MSRP
$64,300 - $66,700
2006 Lexus GS 300

Key Specifications for 2006 Lexus GS 300

Fuel Economy 7.2 - 11.1 City/HWY combined
Horsepower 245 hp
Drivetrain Rear-Wheel Drive, All-Wheel Drive
Engine Gasoline
Torque 230 ft-lb
Seats 5
 

Trim Comparison

Showing of 2 trims
Standard Standard Not Available Not Available Optional Optional
 
 
 
 
Engine
Engine
 
Displacement
Displacement
 
Fuel System
Fuel System
 
Horsepower
Horsepower
 
Torque
Torque
 
Steering
Steering
 
Drivetrain
Drivetrain
 
Transmission
Transmission
 

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2014-458
Recall date
2014-10-16
System affected
Fuel Supply
Model year(s) affected
2006 2007 2008 2009 2010
Manufacturer Recall Number:
SSC255
Units Affected:
18,949
Notification Type:
Safety Mfr
On certain vehicles, the fuel delivery pipes in the engine compartment may have been produced with particles from the anti-corrosion plating on the gasket seating surface where the fuel pressure sensor is installed. This could affect the sealing properties of the gasket seated between the pressure sensor and the pipe, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the gasket and repair the gasket seating surface.
Recall number
2011-080
Recall date
2011-02-24
System affected
Other
Model year(s) affected
2006 2007
Manufacturer Recall Number:
132
Units Affected:
852
Notification Type:
Safety Mfr
On certain AWD vehicles, if the floor carpet near the accelerator pedal is not reinstalled correctly following a service repair, the plastic pad embedded into the floor carpet could interfere with the operation of the accelerator pedal. If this occurs, the accelerator pedal could temporarily become stuck in a partially depressed position, rather than return to the idle position. This could result in a loss of throttle control and a crash causing property damage and/or personal injury. Correction: Dealers will modify the plastic pad.
Recall number
2011-037
Recall date
2011-01-26
System affected
Fuel Supply
Model year(s) affected
2006 2007
Manufacturer Recall Number:
131
Units Affected:
11,773
Notification Type:
Safety Mfr
On certain GS 300, GS 300 AWD, GS 350, IS 250, IS 250 AWD and IS 350 vehicles, the fuel pressure sensor connected to the engine fuel delivery pipe may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and pipe, and through the threaded portion of the sensor. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect for fuel leakage from the threaded portion of the fuel pressure sensor. If there are no signs of a fuel leak, the fuel pressure sensor will be tightened to specifications. If a fuel leak is confirmed, the gasket between the sensor and the fuel delivery pipe will be replaced, and the sensor will be tightened.
Recall number
2010-361
Recall date
2010-10-21
System affected
Brakes
Model year(s) affected
2006
Manufacturer Recall Number:
127, 128
Units Affected:
28,679
Notification Type:
Safety Mfr
Certain vehicles use brake fluids containing polymers that act as lubricants for certain brake system components. If during vehicle maintenance, brake fluid is used that does not contain such polymers or only small amounts, part of the internal rubber seal located at the end of the brake master cylinder piston may become dry and may curl during movement of the piston. If this occurs, a small amount of the brake fluid could slowly leak from the brake master cylinder into the brake booster, resulting in illumination of the brake warning lamp. If the brake warning light has illuminated and the vehicle continues to be operated without refilling the master cylinder brake fluid reservoir, the driver will begin to notice a spongy or soft brake pedal feel and braking performance may gradually decline. This will increase the stopping distance, increasing the likelihood of a crash. Correction: Dealers will replace the brake master cylinder seal with a newly designed one.
Recall number
2009-015
Recall date
2009-01-19
System affected
Fuel Supply
Model year(s) affected
2006 2007
Manufacturer Recall Number:
911
Units Affected:
8,391
Notification Type:
Safety Mfr
On certain vehicles, the use of selected ethanol fuels may cause the aluminium fuel rails to corrode. This could result in plugged fuel injector(s), causing a rough engine idle and/or the illumination of the engine warning lamp. Corrosion may also cause a pinhole to develop on the fuel rail, which could result in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire. Correction: Dealers will replace the fuel rails.
Recall number
2007-377
Recall date
2007-11-28
System affected
Fuel Supply
Model year(s) affected
2006
Manufacturer Recall Number:
Units Affected:
1,718
Notification Type:
Safety Mfr
On certain GS 300, GS 300 AWD, IS 250, IS 250 AWD and IS 350 vehicles, incorrect fabrication process may cause the fuel lines to crack, possibly resulting in a leak. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire causing injury or death. Correction: Dealers will replace the fuel lines.
Recall number
2006-078
Recall date
2006-04-13
System affected
Seats And Restraints
Model year(s) affected
2006
Manufacturer Recall Number:
605
Units Affected:
1,285
Notification Type:
Safety Mfr
On certain GS 300, GS 300 AWD, GS 430, IS 250, IS 250 AWD and IS 350 vehicles, the front seat belt retractors may contain an inappropriately sized part for the emergency locking system. This can prevent the locking system from releasing when it is activated. If the seat belt is locked in this condition, the occupant may either not fasten the seat belt, or be inadequately restrained due to improper belt-fit thereby increasing the risk of injury. Correction: Dealers will replace the front seat belt assemblies.
Recall number
2006-068
Recall date
2006-03-29
System affected
Airbag
Model year(s) affected
2006
Manufacturer Recall Number:
604
Units Affected:
1
Notification Type:
Safety Mfr
This vehicle may contain inadequate side airbag inflators. The airbag inflators were produced with an insufficient amount of the heating agents which apply heat to the argon gas in the inflator. In this condition, expansion force of the gas in the inflator may be insufficient to properly inflate the airbag when the system is activated during a collision, which can increase the risk of injury. Correction: Dealer will replace the side airbag module.

Similar Vehicles

Select Another Vehicle
Search now