2009 Honda CR-V

Issue: 
On certain vehicles, the rear frame could rust. In extreme cases, this could result in a rear trailing arm separating from the vehicle. 
Note: This recall replaces recall HN70 (Transport Canada Recall No. 2019-025). Vehicles that were inspected or repaired under that recall also require this second inspection and repair. 

Safety Risk: 
A rear trailing arm that separates could cause a loss of control and increase the risk of a crash. 

Corrective Actions:
Honda will notify owners by mail and instruct you to take your vehicle to a dealership for an inspection of the rear frame stiffeners. If the vehicle passes the inspection, the dealer will install a brace. For a vehicle that does not pass the inspection, Honda will repurchase the vehicle. In the event the repurchase is declined by an owner, a secondary inspection and body shop repair method may be possible.

Issue: 
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. 
Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. 

Safety Risk: 
Glass that breaks in to large pieces could create a risk of injury. 
 
Corrective Actions: 
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

This recall was replaced by Transport Canada Recall No. 2023-187. 

Issue: 
On certain vehicles, the rear frame could rust. In extreme cases, this could result in a rear trailing arm separating from the vehicle. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador). 

Safety Risk: 
A rear trailing arm that separates could cause a loss of control and increase the risk of a crash. 

Corrective Actions: 
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer for an inspection of the rear frame stiffeners. If the vehicle passes the inspection, dealers will apply corrosion protection. For a vehicle that does not pass the inspection, Honda will repurchase the vehicle. In the event the repurchase is declined by an owner, a secondary inspection and body shop repair method may be possible.

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. For the GL1800 model, dealers will replace the airbag module. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect/replace the driver's frontal airbag inflator. Note:  Honda Canada has created a special Airbag Inflator Hotline for immediate assistance.  For more information, please contact: 

For Honda Owners: 1-877-445-7754
For Acura Owners: 1-877-445-9844