Honda Accord - Prices, Trims, Specs, Options, Photos, Reviews, Deals | autoTRADER.ca

Honda Accord

Honda Accord

Model Overview

No model overview available

Photos

Reviews and News

View All Articles

Owner Scores

Based on 473 reviews
Comfort 9
90% Complete
Performance 9
90% Complete
Fuel Economy 9
80% Complete
Interior Design 8
80% Complete
Exterior Styling 9
90% Complete
Reliability 9
90% Complete

Owner Reviews

Alex9574 Accord is car for people! October 25, 2018 EX
Overall Score
Drive Accord 2008 EX and I'm second owner. Bought car with 140K mileage and made 143K for 5 years so now it has 283K on odometer. I do not know any mechanic shops in my area because have no one reason to visit them. Except Honda dealership to change oil and transmission fluid. This car is fantastic and worth every dollar I spent. Like its design of exterior and interior both and quality of materials. Only this car love is original fluids so do not save on it! Time to time I thinking to buy more fresh Accord but still not sure) Especially looking on newest ugly Honda model line...
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 8
80% Complete
Interior Design 10
100% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete
View all owner reviews

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2020-015
Recall date
2020-01-17
System affected
Airbag
Model year(s) affected
2000
Manufacturer Recall Number:
Units Affected:
85,247
Notification Type:
Safety Mfr
Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: This recall is for airbag inflators that may have been installed when the vehicle had the steering wheel airbag replaced. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.
Recall number
2020-014
Recall date
2020-01-17
System affected
Airbag
Model year(s) affected
1998 1999 2000
Manufacturer Recall Number:
Units Affected:
198,995
Notification Type:
Safety Mfr
Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.
Recall number
2019-323
Recall date
2019-06-28
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004 2005 2006 2007
Manufacturer Recall Number:
Units Affected:
222,662
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Note: This is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2019-117
Recall date
2019-03-07
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004 2005 2006 2007
Manufacturer Recall Number:
Units Affected:
83,977
Notification Type:
Safety Mfr
Issue: On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: This recall only affects certain vehicles that had a Takata airbag inflator installed during a previous airbag recall or collision repair. Safety Risk: In a crash where the airbag deploys, there could be an increased risk of injury. Corrective Action: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.
Recall number
2018-523
Recall date
2018-09-27
System affected
Airbag
Model year(s) affected
2010 2011 2012
Manufacturer Recall Number:
Units Affected:
263,289
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator.
Recall number
2018-001
Recall date
2018-01-10
System affected
Airbag
Model year(s) affected
2009
Manufacturer Recall Number:
Units Affected:
129,348
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. For the GL1800 model, dealers will replace the airbag module. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2017-327
Recall date
2017-06-30
System affected
Electrical
Model year(s) affected
2013 2014 2015 2016
Manufacturer Recall Number:
HN21
Units Affected:
51,995
Notification Type:
Safety Mfr
On certain vehicles, the case for the battery sensor may have been improperly manufactured with gaps that could allow for moisture intrusion. If moisture or road salt were to enter the battery sensor case, it could result in corrosion to the sensor, which could cause an electrical short, increasing the risk of a fire causing injury and/or property damage. Correction: Dealers will inspect, and replace the battery sensor as necessary.
Recall number
2017-186
Recall date
2017-03-30
System affected
Airbag
Model year(s) affected
2003
Manufacturer Recall Number:
HM99
Units Affected:
3,180
Notification Type:
Safety Mfr
On certain two-door vehicles equipped with four-cylinder engines that had the passenger’s frontal airbag replaced in the past, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger side frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will inspect the passenger's frontal airbag module, and will replace it if necessary. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2017-009
Recall date
2017-01-10
System affected
Airbag
Model year(s) affected
2008
Manufacturer Recall Number:
Units Affected:
428,641
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2016-032
Recall date
2016-01-25
System affected
Airbag
Model year(s) affected
2008 2009 2010
Manufacturer Recall Number:
HM64
Units Affected:
23,156
Notification Type:
Safety Mfr
On certain vehicles, over time, moisture could enter the Supplemental Restraint System (SRS) controller and could cause a fault in the airbag system. This could result in the airbag controller becoming inoperative, which would prevent the airbag(s) from deploying. Failure of an airbag to deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the SRS control module. Note: This condition would cause the illumination of the SRS warning light. Note: This recall supersedes recall 2015-473. Vehicles repaired under the previous recall will require re-inspection and repair.
Recall number
2015-473
Recall date
2015-10-16
System affected
Airbag
Model year(s) affected
2008
Manufacturer Recall Number:
HM21
Units Affected:
20,247
Notification Type:
Superseded
On certain vehicles, the Supplementary Restraint System (SRS) threshold setting for the side impact sensor could be too sensitive. If the vehicle ignition is on, and there was a strong, non-vehicular collision impact to the lower body of the vehicle or if a door is shut with extreme force, the SRS ECU may interpret the input as a crash and command the seat airbag and/or side curtain airbag to deploy. Unintended airbag deployment, in a non-warranted (non-impact) situation, could result in injury and increase the risk of a vehicle crash causing injury and/or property damage. Correction: Dealers will update the SRS software. Note: This recall is superseded by recall 2016-032. Please see recall 2016-032 for more information. Click here for more information.
Recall number
2015-261
Recall date
2015-06-15
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006 2007
Manufacturer Recall Number:
H-3-15
Units Affected:
235,711
Notification Type:
Safety Mfr
On certain vehicles, the passenger frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2015-225
Recall date
2015-05-27
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004 2005 2006 2007
Manufacturer Recall Number:
Units Affected:
704,770
Notification Type:
Safety Mfr
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2014567. Correction: Dealers will inspect/replace the driver’s frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2015-091
Recall date
2015-02-27
System affected
Engine
Model year(s) affected
2015
Manufacturer Recall Number:
M32/33
Units Affected:
6
Notification Type:
Safety Mfr
On certain vehicles, during assembly, some of the connecting rod bolts may not have been torqued to the correct specification. If a connecting rod bolt was not torqued correctly, it could loosen and result in the engine making an unusual rattling/knocking noise, leaking oil, and/or engine failure. Engine failure would result in a loss of motive power, which would increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the engine short block.
Recall number
2014-567
Recall date
2014-12-15
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004 2005 2006 2007
Manufacturer Recall Number:
Units Affected:
704,770
Notification Type:
Superseded
Honda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: Click here for more information
Recall number
2014-242
Recall date
2014-06-20
System affected
Airbag
Model year(s) affected
2003
Manufacturer Recall Number:
H-2-14
Units Affected:
168,968
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This recall is an expansion of recall 2013111. Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Recall number
2013-240
Recall date
2013-07-05
System affected
Fuel Supply
Model year(s) affected
2013
Manufacturer Recall Number:
Units Affected:
36
Notification Type:
Safety Mfr
On certain vehicles, the fuel tank may have been manufactured incorrectly and could leak. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel tank.
Recall number
2012-326
Recall date
2012-09-28
System affected
Steering
Model year(s) affected
2003 2004 2005 2006 2007
Manufacturer Recall Number:
HL54
Units Affected:
29,947
Notification Type:
Safety Mfr
On certain vehicles, due to prolonged exposure to high heat, the power steering hose could crack and leak power steering fluid. Fluid leaking onto a hot surface could cause smoke and could potentially result in an underhood fire. Correction: Dealers will replace the power steering hose.
Recall number
2012-031
Recall date
2012-01-31
System affected
Airbag
Model year(s) affected
2012
Manufacturer Recall Number:
HL39, HL41
Units Affected:
59
Notification Type:
Safety Mfr
On certain vehicles, the side curtain airbag inflators may have been incorrectly manufactured and, as a result, one or both airbags may not deploy as intended. Failure of a side curtain airbag to deploy during a crash (where deployment is warranted), could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace one or both side curtain airbag assemblies.
Recall number
2011-419
Recall date
2011-12-05
System affected
Airbag
Model year(s) affected
2001 2002
Manufacturer Recall Number:
HL32, HL31, HL33, HL34, AK43, AK45
Units Affected:
26,964
Notification Type:
Safety Mfr
On certain vehicles, the driver's airbag inflator could produce excessive internal pressure. If an affected airbag deploys, the increased internal pressure may cause the inflator to rupture and metal fragments could pass through the airbag cushion material and cause injury to vehicle occupants. Correction: Dealers will replace airbag inflator.
Recall number
2011-286
Recall date
2011-08-05
System affected
Powertrain
Model year(s) affected
2005 2006 2007 2008 2009 2010
Manufacturer Recall Number:
HL27, HL24
Units Affected:
135,142
Notification Type:
Safety Mfr
On certain vehicles, the secondary shaft bearing in the automatic transmission may fail. This could cause abnormal noise, the malfunction indicator lamp to turn ON, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission, resulting in a short circuit that causes the engine to stall. Engine stalling would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Additionally, broken pieces may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the PARK position. These issues could result in property damage and/or personal injury. Correction: Dealers will update the automatic transmission control module software.
Recall number
2010-264
Recall date
2010-08-09
System affected
Powertrain
Model year(s) affected
2003
Manufacturer Recall Number:
HL00, HL01, HL02, AK33
Units Affected:
58,292
Notification Type:
Safety TC
On certain vehicles the interlock lever of the ignition switch may wear prematurely, which can allow the interlock function to be defeated if the driver does not follow the typical shut-down procedure of shifting the gear selector to the PARK position before rotating the ignition key to the OFF position. Removal of the ignition key when the gear selector of a vehicle with an automatic transmission has not been shifted to the PARK position can allow the vehicle to roll away, increasing the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the original interlock pin and lever within the ignition switch with updated versions.
Recall number
2010-042
Recall date
2010-02-11
System affected
Airbag
Model year(s) affected
2001 2002
Manufacturer Recall Number:
Units Affected:
41,685
Notification Type:
Safety Mfr
On certain vehicles, the driver's airbag inflator could produce excessive internal pressure. If an affected airbag deploys, the increased internal pressure may cause the inflator to rupture and metal fragments could pass through the airbag cushion material and cause injury to vehicle occupants. Correction: Dealers will replace airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844 Update June 2016: New U.S. research shows that these Takata airbags may be at higher risk of failure. Please ensure you have this recall done if your vehicle is affected.
Recall number
2009-340
Recall date
2009-11-27
System affected
Other
Model year(s) affected
2008 2009
Manufacturer Recall Number:
HK90
Units Affected:
96
Notification Type:
Service Campaign Mfr
Certain accessory nose masks may impede operation of the hood secondary latch. Without secondary latch function, a hood that has not completely closed (because the primary latch has not been engaged) may lift up while the vehicle is being driven, compromising the driver's ability to see the road and its users. This could result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will replace the nose mask with an updated version.
Recall number
2008-414
Recall date
2008-11-18
System affected
Airbag
Model year(s) affected
2001 2002
Manufacturer Recall Number:
AK25, AK26
Units Affected:
91,447
Notification Type:
Safety Mfr
On certain vehicles, the driver's airbag inflator could produce excessive internal pressure. If an affected airbag deploys, the increased internal pressure may cause the inflator to rupture and metal fragments could pass through the airbag cushion material and cause injury to vehicle occupants. Correction: Dealers will replace airbag inflator. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844 Update June 2016: New U.S. research shows that these Takata airbags may be at higher risk of failure. Please ensure you have this recall done if your vehicle is affected.
Recall number
2008-131
Recall date
2008-04-22
System affected
Other
Model year(s) affected
2003
Manufacturer Recall Number:
Units Affected:
29,462
Notification Type:
Safety Mfr
On certain vehicles, if water enters the windshield wiper motor breather port, which is designed to allow the motor to vent warm air during normal operation, it can result in corrosion inside the motor housing. This could cause the windshield wiper motor to become inoperative, which could result in a vehicle crash causing personal injury or death. Correction: Dealers will affect repairs.
Recall number
2007-088
Recall date
2007-03-19
System affected
Fuel Supply
Model year(s) affected
2005
Manufacturer Recall Number:
Units Affected:
12,143
Notification Type:
Safety Mfr
On certain vehicles, a manufacturing fault with the fuel pump relay could cause the coil wire in the relay to break. If this happens, the fuel pump will not operate and the engine may not start. If the relay fails while driving, the engine may stall without warning and a crash could occur. Correction: Dealers will inspect and, if required, replace the fuel pump relay.
Recall number
2007-013
Recall date
2007-01-18
System affected
Airbag
Model year(s) affected
2004 2005
Manufacturer Recall Number:
Units Affected:
9,043
Notification Type:
Safety Mfr
The seat position sensor (SPS) detects the driver's seating position and adjusts the airbag inflation pressure accordingly in the event of a crash. This is primarily to lessen the inflation pressure for smaller statured drivers who usually sit closer to the steering wheel. In the affected vehicles, the SPS harness was incorrectly attached to the 8-way power seat frame. Over time, the sensor harness could break which would cause the airbag warning light to be illuminated, and the SPS to fail. A failure of the SPS causes the airbag deployment to default to full inflation pressure, regardless of the seat position. Full deployment of the driver's airbag could increase the risk of injury for smaller statured drivers in a frontal crash. Correction: Dealers will replace the seat position sensor wiring harness.
Recall number
2005-348
Recall date
2005-11-07
System affected
Airbag
Model year(s) affected
2006
Manufacturer Recall Number:
HK38
Units Affected:
52
Notification Type:
Safety Mfr
On certain vehicles, the front impact sensor bolts were not torqued properly during vehicle assembly. If the bolts loosen or fall out, the sensor may fail to properly detect a crash, possibly resulting in delayed or non-deployment of the front airbags. Note: All affected vehicles were in dealer inventory and were inspected and repaired as part of the initial investigation.
Recall number
2004-410
Recall date
2004-11-24
System affected
Airbag
Model year(s) affected
2004 2005
Manufacturer Recall Number:
IX-11-04
Units Affected:
15,362
Notification Type:
Safety Mfr
On certain vehicles, a tear in the fabric of the driver's front airbag occurred after apparent contact with the inside surface of the airbag cover during deployment. A torn airbag may not offer the same level of protection in the event of a crash thereby increasing the risk of injury to the driver. Correction: Dealers will install a protective fabric flap between the airbag module and the airbag cover.
Recall number
2004-143
Recall date
2004-04-23
System affected
Powertrain
Model year(s) affected
2003 2004
Manufacturer Recall Number:
AJ85, AJ86, HK18
Units Affected:
85,184
Notification Type:
Safety Mfr
Certain operating conditions can result in heat build-up between the countershaft and secondary shaft second gears in the automatic transmission, eventually leading to gear tooth chipping or, in very rare cases, gear breakage can occur. Gear failure could result in transmission lock-up. Correction: On vehicles with 24 000 kms or less, the dealer will update the transmission with a simple revision to the oil cooler return line to increase lubrication to second gear. On vehicles with more than 24 000 kms, the dealer will inspect the transmission to identify gears that have already experienced discoloration due to overheating. If discolouration exists, the transmission will be replaced. If discolouration is not present, the dealer will perform the revision to the oil cooler return line.
Recall number
2002-063
Recall date
2002-04-02
System affected
Airbag
Model year(s) affected
2000
Manufacturer Recall Number:
AJ60, HJ78
Units Affected:
130
Notification Type:
Safety Mfr
On certain passenger vehicles a component in the inflator of some passenger air bag modules was not welded properly. As a result, the affected air bags may not deploy correctly in a crash, increasing the risk of injury to a front seat passenger. Correction: Dealers will replace the passenger air bag module.
Recall number
2001-295
Recall date
2001-12-18
System affected
Seats And Restraints
Model year(s) affected
2000 2001
Manufacturer Recall Number:
HJ76
Units Affected:
3,628
Notification Type:
Safety Mfr
Certain vehicles rear seat belt buckles have improperly manufactured lock bars. This could result in an inability to unlatch the belt as required in C.M.V.S.S. 209. Correction: Dealers will inspect and replace the rear seat belt buckles.
Recall number
2000-159
Recall date
2000-07-25
System affected
Suspension
Model year(s) affected
2000
Manufacturer Recall Number:
Units Affected:
3,000
Notification Type:
Safety Mfr
On certain vehicles, the rear suspension lower arm or control arm could break due to improper welding. This condition could result in extreme rear wheel toe and adversely affect vehicle handling and control. Correction: Vehicle will be inspected and suspension arms with an affected lot number will be replaced.
Select Another Vehicle
Search now