BMW X6 - Prices, Trims, Specs, Options, Photos, Reviews, Deals | autoTRADER.ca

Explore BMW X6

Photos

Reviews and News

View all articles

Owner Scores

Based on 19 reviews
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 8
80% Complete
Interior Design 9
90% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete

Owner Reviews

hunter4203623 My BMW X6 June 04, 2017 red
Overall Score
i just love BMW and the company they make the best cars on the roads today, I have never had any problems with my BMW X6 i keep it up to date if you bring it in to get serviced the BMW people are very good at what they do they even give you a lemon car to drive around while your car gets work done.
Comfort 10
100% Complete
Performance 10
100% Complete
Fuel Economy 10
100% Complete
Interior Design 10
100% Complete
Exterior Styling 10
100% Complete
Reliability 10
100% Complete
View all owner reviews

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2020409
Recall date
2020-09-01
System affected
Lights And Instruments
Model year(s) affected
2020 2021
Manufacturer Recall Number:
51 83 20RC
Units Affected:
160
Notification Type:
Compliance Mfr
Issue: On certain vehicles, the wrong headlight lenses may have been installed. This could cause the headlights to produce blue light. Canadian regulations do not allow headlights to emit a blue light. Safety Risk: Headlights that produce blue light may confuse other road users. This could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the headlights. They will be replaced, if necessary.
Recall number
2020380
Recall date
2020-08-14
System affected
Tires
Model year(s) affected
2021
Manufacturer Recall Number:
36 80 20RC
Units Affected:
6
Notification Type:
Safety Mfr
Issue: A small number of vehicles were built with tires that may have a defect in the inner layer of the tire. This could lead to sudden loss of air pressure or a tire failure. Note: This recall only affects vehicles equipped with Pirelli P-Zero 275/35R22 or Pirelli P-Zero 315/30R22 tires, with date codes of either 2820 or 2920. Safety Risk: A tire failure could cause a loss of control and increase the risk of a crash. Corrective Actions: None of the affected vehicles have been sold to retail customers. BMW will instruct dealers to inspect the tires and each affected vehicle. The tires will be replaced, if necessary.
Recall number
2020379
Recall date
2020-08-14
System affected
Structure
Model year(s) affected
2020
Manufacturer Recall Number:
51 81 20RC
Units Affected:
6
Notification Type:
Safety Mfr
Issue: On certain vehicles, the rear spoiler might not be properly attached. This could cause the spoiler to detach from the vehicle. Safety Risk: A spoiler that detaches from the vehicle could create a hazard for other drivers and nearby people. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the rear spoiler, and if necessary, replace it.
Recall number
2020366
Recall date
2020-08-07
System affected
Powertrain
Model year(s) affected
2020
Manufacturer Recall Number:
12 85 20RC
Units Affected:
7
Notification Type:
Safety Mfr
Issue: On a small number of vehicles, an extra bolt may have been installed in the starter motor. The bolt was not properly attached and could fall into the transmission housing. If this happens, you may hear an unusual noise from the transmission and the engine could stall suddenly. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: None of the affected vehicles have been sold to retail customers. BMW will instruct dealers to inspect the vehicles. If an additional bolt is found, it will be removed. BMW will replace any parts that are damaged by this problem before the vehicles are sold.
Recall number
2020067
Recall date
2020-02-19
System affected
Structure
Model year(s) affected
2020
Manufacturer Recall Number:
51 80 20RC
Units Affected:
163
Notification Type:
Safety Mfr
Issue: On certain vehicles, the rear spoiler might not be properly attached. This could cause the spoiler to detach from the vehicle. Safety Risk: A spoiler that detaches from the vehicle could create a hazard for other drivers and nearby people. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the rear spoiler, and if necessary, replace it.
Recall number
2020010
Recall date
2020-01-15
System affected
Airbag
Model year(s) affected
2011
Manufacturer Recall Number:
72 81 20RC
Units Affected:
11
Notification Type:
Safety Mfr
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag module. The passenger-front airbag module will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2020008
Recall date
2020-01-15
System affected
Airbag
Model year(s) affected
2013 2014
Manufacturer Recall Number:
32 80 20RC / 32 81 20RC
Units Affected:
47
Notification Type:
Safety Mfr
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2019582
Recall date
2019-11-18
System affected
Structure
Model year(s) affected
2015 2016 2017 2018 2019
Manufacturer Recall Number:
Units Affected:
5,139
Notification Type:
Safety Mfr
Issue: On certain vehicles, the attachment points for the lower universal anchorage system (for attaching a child seat) could be damaged over time. As a result, a child seat may come loose. Safety Risk: A child seat that is not properly secured could create an increased risk of injury in a crash. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to add a reinforcing bracket to the lower anchor bars and the vehicle body.
Recall number
2019480
Recall date
2019-10-01
System affected
Visual System
Model year(s) affected
2020
Manufacturer Recall Number:
66 82 19RC
Units Affected:
14,323
Notification Type:
Compliance Mfr
Issue: On certain vehicles, the rearview camera does not return to the default settings when it turns on. This could make the rearview image difficult to see if a driver had previously adjusted the camera display brightness at or near the lowest setting, and contrast at or near the highest setting. Canadian regulations require that the rearview display returns to the default view each time the camera is turned on. Safety Risk: Reduced rear visibility could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rearview camera. Drivers are recommended not to adjust the display brightness at or near the lowest setting, and contrast at or near the highest setting, until this recall is completed.
Recall number
2019018
Recall date
2019-01-15
System affected
Airbag
Model year(s) affected
2008 2009 2010 2011 2012 2013 2014
Manufacturer Recall Number:
Units Affected:
20,532
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2018538
Recall date
2018-09-28
System affected
Suspension
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
15
Notification Type:
Safety Mfr
On certain vehicles, the pivot bolt used on the rear upper control arms could break. If this occurs, it could affect vehicle handling, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace both rear upper control arms.
Recall number
2018496
Recall date
2018-09-12
System affected
Wheels
Model year(s) affected
2018 2019
Manufacturer Recall Number:
Units Affected:
6
Notification Type:
Safety Mfr
On certain vehicles, the wheel bolts may not have been properly tightened. This could cause a wheel could become loose and fall off the vehicle, increasing the risk of a crash causing injury and/or damage to property. In addition, the wheel assembly could strike another vehicle, stationary object, or bystander, causing injury and/or property damage. Correction: Dealers will replace the wheel bolts and tighten them to specification.
Recall number
2018353
Recall date
2018-06-28
System affected
Suspension
Model year(s) affected
2018
Manufacturer Recall Number:
Units Affected:
19
Notification Type:
Safety Mfr
On certain vehicles, the front left lower control arm pivot bolt may not have been properly hardened during the manufacturing process. This could cause the front left lower control arm pivot bolt to break, which could affect vehicle handling and control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the front left lower control arm and replace it as necessary.
Recall number
2018195
Recall date
2018-04-19
System affected
Electrical
Model year(s) affected
2008 2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
3,739
Notification Type:
Safety Mfr
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing injury and/or damage to property. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied. Additional note: This is an expansion of recalls 2011-376 and 2012-008.
Recall number
2018018
Recall date
2018-01-09
System affected
Airbag
Model year(s) affected
2009
Manufacturer Recall Number:
Units Affected:
4,035
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag module. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2017568
Recall date
2017-11-17
System affected
Suspension
Model year(s) affected
2018
Manufacturer Recall Number:
Units Affected:
15
Notification Type:
Safety Mfr
On certain vehicles, the lower control arm suspension bolts may not have been tightened properly during the manufacturing process. Loose lower control arm suspension bolts could affect vehicle handling, which would increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the lower control arm suspension bolts and tighten them to specification.
Recall number
2017269
Recall date
2017-05-19
System affected
Label
Model year(s) affected
2017
Manufacturer Recall Number:
Units Affected:
33
Notification Type:
Compliance Mfr
Certain M-Series vehicles may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 110 - Tire Selection and Rims. For some X5 M and X6 M vehicles, the tire and loading information label incorrectly states the vehicles were equipped with 20-inch tires, however the vehicles are equipped with 21-inch tires. For some M6 Cabriolet and M6 Coupe vehicles, the tire and loading information label incorrectly states the vehicles were equipped with 19-inch tires, however the vehicle is equipped with 20-inch tires. Additionally, the label for the M6 Cabriolet and M6 Coupe vehicles incorrectly displays a value of 32psi (220 kPa), although it should display a value of 35psi (240kPa). Correction: Dealers will replace the Tire and Loading label.
Recall number
2017113
Recall date
2017-03-03
System affected
Powertrain
Model year(s) affected
2011 2012 2013 2014
Manufacturer Recall Number:
Units Affected:
12,100
Notification Type:
Safety Mfr
Certain vehicles may have been manufactured with defective front driveshaft universal joint seals, which could allow water and/or dirt to enter the universal joint, causing accelerated wear and/or corrosion, and resulting in vibration. If the vehicle continues to be operated in this state, the universal joint could eventually break, potentially damaging surrounding components and rendering the vehicle inoperative. This could increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will replace the front drive shaft. Note: This is an expansion of recall 2016-226.
Recall number
2017016
Recall date
2017-01-10
System affected
Airbag
Model year(s) affected
2008
Manufacturer Recall Number:
Units Affected:
7,671
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag module or inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2016505
Recall date
2016-10-13
System affected
Fuel Supply
Model year(s) affected
2008 2009 2010 2011
Manufacturer Recall Number:
Units Affected:
16,663
Notification Type:
Safety Mfr
On certain vehicles, the wires going to the in-tank fuel pump may not have been crimped correctly. An incorrect crimp could increase the resistance of the circuit which could cause the contact pin to heat and melt the surrounding plastic. This could potentially cause the fuel pump to stop working causing the vehicle to stall without warning, increasing the risk of a crash causing injury and/or damage to property. Also, in a very rare case, a fuel leak combined with an external ignition source, could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the fuel delivery module.
Recall number
2016226
Recall date
2016-05-13
System affected
Powertrain
Model year(s) affected
2011
Manufacturer Recall Number:
Units Affected:
3,331
Notification Type:
Safety Mfr
Certain vehicles may have been manufactured with defective front driveshaft universal joint seals, which could allow water and/or dirt to enter the universal joint, causing accelerated wear and/or corrosion, and resulting in vibration. If the vehicle continues to be operated in this state, the universal joint could eventually break, potentially damaging surrounding components and rendering the vehicle inoperative. This could increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will replace the front drive shaft.
Recall number
2016142
Recall date
2016-03-31
System affected
Airbag
Model year(s) affected
2008 2009 2010 2011 2012 2013 2014
Manufacturer Recall Number:
Units Affected:
104,151
Notification Type:
Recalls Audit
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.
Recall number
2014127
Recall date
2014-04-10
System affected
Engine
Model year(s) affected
2010 2011 2012
Manufacturer Recall Number:
Units Affected:
20,022
Notification Type:
Safety Mfr
On certain vehicles, housing bolts for the variable camshaft timing system could break, allowing camshaft timing to deviate. If this occurs, the engine would revert to "limp home mode", limiting available engine power. This could increase the risk of a collision causing injury and/or damage to property. Correction: Dealers will replace affected bolts.
Recall number
2012178
Recall date
2012-06-12
System affected
Steering
Model year(s) affected
2013
Manufacturer Recall Number:
Units Affected:
184
Notification Type:
Safety Mfr
On certain vehicles, the steering gear was manufactured incorrectly and, as a result, a steering fluid leak could develop. Loss of power steering fluid could cause a loss of steering power assist, which may result in a crash. Also, power steering fluid leakage may contact a hot engine or exhaust component, which could cause a fire. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the steering gear assembly.
Recall number
2012129
Recall date
2012-04-12
System affected
Label
Model year(s) affected
2008 2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
67,771
Notification Type:
Inconsequential
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
Recall number
2012127
Recall date
2012-04-04
System affected
Label
Model year(s) affected
2012
Manufacturer Recall Number:
Units Affected:
107
Notification Type:
Inconsequential
On certain BMW X6 M vehicles, the Tire and Loading Information label incorrectly indicates a vehicle seating capacity of four occupants. The actual seating capacity is five. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
Recall number
2011376
Recall date
2011-10-21
System affected
Electrical
Model year(s) affected
2008 2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
3,143
Notification Type:
Safety Mfr
On certain vehicles, the auxiliary water pump (which cools the turbocharger after the engine is turned OFF) can overheat and fail. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the auxiliary water pump. Note: Owners are advised to park the vehicle outdoors until the remedy is applied.
Recall number
2010177
Recall date
2010-06-01
System affected
Label
Model year(s) affected
2011
Manufacturer Recall Number:
Units Affected:
13
Notification Type:
Compliance Mfr
Certain vehicles equipped with 20 inch wheels & tires may have incorect information listed on the tire information label. The label may erroniously state that the vehicle is equipped with 19 inch wheels & tires. Correction: BMW will provide new labels to owners.
Recall number
2010017
Recall date
2010-01-26
System affected
Visual System
Model year(s) affected
2010
Manufacturer Recall Number:
Units Affected:
6
Notification Type:
Safety Mfr
On certain vehicles, windshield bonding may be insufficient and, in case of a vehicle rollover, this could adversely affect the rigidity of the vehicle bodyshell structure, which could result in personal injury or death. Correction: Dealers will remove and refit the windshield.
Recall number
2009204
Recall date
2009-07-08
System affected
Brakes
Model year(s) affected
2009
Manufacturer Recall Number:
Units Affected:
2
Notification Type:
Safety Mfr
On certain vehicles, the rear brake discs may not have been manufactured according to specifications. As a result, a reduction in braking performance at the affected rear wheel could occur. In an extreme case, the affected rear brake disc could break resulting in a loss of braking at the wheel. Extended stopping distances may result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the rear brake discs.
Select Another Vehicle
Search now