Back to login
Nissan Pathfinder
Model Overview
The mid-size Pathfinder is Nissan's largest crossover model, slotting in below the full-size Armada. It's characterized by a drive more relaxed and comfortable than that of many competitors, though some of that could be attributed to this being one of the oldest designs in its class. Still, the Pathfinder name carries a lot of weight, and this vehicle lives up to that a spacious, well-done interior.
Photos
Reviews and News
Owner Scores
Comfort
9
Performance
9
Fuel Economy
7
Interior Design
9
Exterior Styling
9
Reliability
9
Owner Reviews
CaidenTousaw
I like this ride but it has problems
December 11, 2017
Overall Score
This car is a magnificent car, if you have kids. I would not recommend this car to someone who is just getting a car for themselves. This car is great for getting the kids to school. This car gets dirty very easily, though it is not hard to vacuum. These are some of the reasons I would recommend this car to parents.
Comfort
10
Performance
8
Fuel Economy
8
Interior Design
6
Exterior Styling
6
Reliability
8
Recall Information
* Data provided by Transport Canada
Recall number
Recall date
System affected
Model year(s) affected
Recall number
2024-148
Recall date
2024-03-05
System affected
Seats And Restraints
Model year(s) affected
2024
Manufacturer Recall Number:
PD106 / PD107
Units Affected:
981
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, the driver seat belt pretensioner may not have been manufactured correctly. As a result, the seat belt pretensioner may not work properly in a crash.
Safety Risk:
A seat belt pretensioner that doesn't work properly could increase the risk of injury in a crash.
Corrective Actions:
Nissan will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the driver seat belt pretensioner.
Recall number
2024-129
Recall date
2024-02-27
System affected
Airbag
Model year(s) affected
2024
Manufacturer Recall Number:
PD103 / PD104 / PMA34
Units Affected:
24
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the driver-front airbag may not have been manufactured properly. Over time, moisture could enter the inflator and cause it not to inflate properly in a crash.
Safety Risk:
An airbag that doesn't inflate properly could increase the risk of injury in a crash.
Corrective Actions:
Nissan will notify owners by mail and advise you to take your vehicle to a dealership to replace the driver-front airbag.
Recall number
2023-223
Recall date
2023-04-14
System affected
Seats And Restraints
Model year(s) affected
2023
Manufacturer Recall Number:
PC966 & PC967
Units Affected:
455
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the driver's seat frame may not have been properly welded. As a result, the seat frame could break in a crash.
Safety Risk:
A seat frame that breaks in a crash could create an increased risk of injury.
Corrective Actions:
Nissan will notify owners by mail and instruct you to take your vehicle to a dealership to inspect and, if necessary, replace the driver's seat cushion frame.
Recall number
2023-053
Recall date
2023-02-10
System affected
Airbag
Model year(s) affected
2005 2006 2007 2008 2011 2012
Manufacturer Recall Number:
PC947 / PC948 / PC949
Units Affected:
10,846
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the plastic emblem on the steering wheel airbag cover could detach and become a projectile when the airbag inflates in a crash.
Note: This recall is for certain vehicles that had the steering wheel airbag replaced.
Safety Risk:
Projectiles in the occupant compartment could increase the risk of an injury.
Corrective Actions:
Nissan will notify owners by mail. The corrective actions for this recall are under development.
Recall number
2023-052
Recall date
2023-02-10
System affected
Airbag
Model year(s) affected
2008 2009 2010 2011
Manufacturer Recall Number:
PC944 / PC945 / PC946
Units Affected:
17,214
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the plastic emblem on the steering wheel airbag cover could detach and become a projectile when the airbag inflates in a crash.
Safety Risk:
Projectiles in the occupant compartment could increase the risk of an injury.
Corrective Actions:
Nissan will notify owners by mail. The corrective actions for this recall are under development.
Recall number
2022-398
Recall date
2022-07-22
System affected
Visual System
Model year(s) affected
2022
Manufacturer Recall Number:
Units Affected:
244
Notification Type:
Compliance Mfr
Issue:
Under certain conditions, a software problem could cause the in-vehicle infotainment system to reset. If you shift to reverse while the computer is resetting, the rearview camera image will not appear on the display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear.
Note: This recall only affects certain vehicles sold to rental fleets.
Safety Risk:
A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Nissan will notify owners by mail and ask you to make an appointment with your local dealer to update the in-vehicle infotainment system software. For vehicles with over-the-air (OTA) update capability, Nissan will send a wireless over-the-air software update to each vehicle.
Recall number
2022-313
Recall date
2022-06-14
System affected
Structure
Model year(s) affected
2013 2014 2015 2016
Manufacturer Recall Number:
R22A2
Units Affected:
37,115
Notification Type:
Safety TC
Issue:
Over time, dirt buildup could cause the secondary hood latch to stick open after it is used. If this happens, and the primary hood latch is released, the hood may open suddenly while driving.
Safety Risk:
A hood that opens suddenly while driving could block the driver's view and increase the risk of a crash.
Corrective Actions:
Nissan will notify owners by mail. The corrective actions for this recall are under development. Nissan will send you a second notice when a final repair is available. In the interim, Nissan will provide you with instructions for how to inspect the hood latch. If the hood latch does not move freely, you should take your vehicle to a Nissan dealership for inspection and repair. If the latch moves freely, you should follow the maintenance in the owner's manual or bring your vehicle to a dealership to perform the service free of charge.
Recall number
2021-593
Recall date
2021-09-24
System affected
Seats And Restraints
Model year(s) affected
2022
Manufacturer Recall Number:
Units Affected:
890
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, the head restraints on the third-row (rear) seats may not have been properly welded. As a result, the head restraint could move or detach from the seat in a crash.
Safety Risk:
Head restraints that move or detach in a crash could increase the risk of an injury.
Corrective Action:
Nissan will contact owners by mail and instruct you to take your vehicle to a dealer to replace the third-row seat head restraints. To reduce the safety risk, Nissan recommends that you should not use the third row rear seats until the recall repairs are completed.
Recall number
2021-592
Recall date
2021-09-24
System affected
Seats And Restraints
Model year(s) affected
2022
Manufacturer Recall Number:
Units Affected:
359
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the second-row seat frames may not have been properly welded. As a result, the seatback could fail and move in a crash.
Safety Risk:
A seatback that fails in a crash could create an increased risk of injury.
Corrective Actions:
Nissan will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the second-row seat frames. The seat assemblies will be replaced, as necessary.
Recall number
2021-020
Recall date
2021-01-21
System affected
Lights And Instruments
Model year(s) affected
2013 2014 2015
Manufacturer Recall Number:
Units Affected:
29,876
Notification Type:
Safety TC
Issue:
On certain vehicles, the stop lamp switch may not have been installed correctly. Over time, this could cause the stop lamp relay to fail and stick in the on position. If this happens, engine power may be reduced and the brake lights will stay on. Additionally, the vehicle may be started and shifted into gear without pressing the brake pedal.
Note: This recall replaces Transport Canada recall 2016-264. Vehicles that were repaired under that recall require a second inspection.
Safety Risk:
The ability to shift the vehicle out of park without depressing the brake pedal and/or starting the engine without depressing the brake pedal could increase the risk of a crash. Brake lights that stay on could cause other road users not to recognize when the vehicle is braking. This could increase the risk of a crash.
Corrective Actions:
Nissan will notify owners by mail and instruct you to take your vehicle to a dealer for an inspection of the stop lamp switch and relay. If the stop lamp relay was deleted during a previous repair, no further action is required. For all other vehicles, the dealer will adjust or move the stop lamp switch and replace the stop lamp relay.
Recall number
2020-003
Recall date
2020-01-10
System affected
Airbag
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
Units Affected:
36,217
Notification Type:
Safety Mfr
Issue:
This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair.
Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Actions:
Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag inflator. The passenger-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2019-567
Recall date
2019-11-11
System affected
Brakes
Model year(s) affected
2017 2018 2019
Manufacturer Recall Number:
Units Affected:
42,447
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the antilock brake system (ABS) actuator pump may leak brake fluid and malfunction. This would cause the ABS warning lamp to turn on. If this problem is not fixed, damage to the ABS actuator could result in a short circuit.
Note: This is a replacement and expansion of Transport Canada recall 2018-486. All vehicles that did not have the ABS actuator pump replaced under that recall require this repair.
Safety Risk:
A short circuit could increase the risk of a fire, even while parked.
Corrective Actions:
The company will notify owners by mail with an interim notice. A final repair is not yet available. If the ABS warning light stays on for 10 seconds or longer, you should park your vehicle outdoors away from other vehicles or structures. You should also call Nissan or Infiniti Roadside assistance to have your vehicle towed to a dealer for repair. A second notice will be sent to you once the final repair parts are available. This letter will advise you to take their vehicle to a dealer to replace the ABS actuator.
Recall number
2019-459
Recall date
2019-09-13
System affected
Visual System
Model year(s) affected
2018 2019
Manufacturer Recall Number:
R1911
Units Affected:
126,195
Notification Type:
Compliance TC
Issue:
On certain vehicles, the rear view camera system does not return to the default setting when the transmission is shifted to reverse. This could cause a reduction in rear visibility if a driver had previously adjusted the camera display. Canadian regulations require that the rear view image returns to its original setting each time the camera is turned on.
Safety Risk:
Reduced rear visibility could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the software for the rear view camera.
Recall number
2019-420
Recall date
2019-08-21
System affected
Other
Model year(s) affected
2005 2006 2007 2008 2009 2010 2011 2012
Manufacturer Recall Number:
Units Affected:
5,327
Notification Type:
Compliance Mfr
Issue:
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones.
Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act.
Safety Risk:
Glass that breaks in to large pieces could create a risk of injury.
Corrective Actions:
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Recall number
2018-486
Recall date
2018-09-10
System affected
Brakes
Model year(s) affected
2017 2018
Manufacturer Recall Number:
R1807 / R1809 / R1808
Units Affected:
19,761
Notification Type:
Safety Mfr
On certain vehicles, the antilock brake system (ABS) actuator pump may leak brake fluid onto an electronic circuit board, causing it to malfunction. This would cause the illumination of the ABS warning lamp on the instrument panel. If the vehicle continues to be operated, damage to the ABS module could lead to a fire, creating a risk of injury and/or damage to property. Correction: Dealers will inspect and replace the ABS actuator as necessary. Note: This replaces recall 2016-424. Vehicles repaired under that campaign require a second repair under this campaign.
Recall number
2017-054
Recall date
2017-02-03
System affected
Airbag
Model year(s) affected
2002
Manufacturer Recall Number:
R1703
Units Affected:
14
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2016-264
Recall date
2016-05-27
System affected
Lights And Instruments
Model year(s) affected
2013 2014
Manufacturer Recall Number:
Units Affected:
4,795
Notification Type:
Safety TC
On certain vehicles, the stop lamp switch may not have been installed properly causing and intermittent contact that could repeatedly cause the switch to cycle on and off. Over time, this may result in the stop lamp relay sticking in the on position, causing the stop lamps to remain illuminated. This could also impair the brake-shifter interlock, allowing the vehicle to inadvertently be shifted out of park position. These situations could increase the risk of a crash or a vehicle rollaway causing injury and/or damage to property. Correction: Dealers will inspect the stop lamp switch for proper installation, if the switch is not installed correctly it will be repositioned and the stop lamp relay will be replaced.
Recall number
2016-179
Recall date
2016-04-25
System affected
Seats And Restraints
Model year(s) affected
2013 2014 2015 2016
Manufacturer Recall Number:
Units Affected:
257,130
Notification Type:
Safety Mfr
On certain vehicles, a defect in the occupant classification system could allow an adult sitting in the front passenger seat to be classified as a child or an “empty seat”. This would suppress the airbag, which could increase the risk of injury in a crash. Correction: For affected Altima, Maxima, Murano, Rogue and Sentra vehicles, dealers will reprogram the airbag control unit and the occupant classification system control unit. For affected Leaf, NV200, Pathfinder, Q50 and JX35/QX60 vehicles, dealers will replace the occupant classification system electronic control unit.
Recall number
2015-491
Recall date
2015-10-20
System affected
Airbag
Model year(s) affected
2013 2014 2015
Manufacturer Recall Number:
Units Affected:
184
Notification Type:
Safety Mfr
Certain vehicles serviced as part of recall 2014-093 or which had the Occupant Classification System (OCS) module replaced during servicing may have been fitted with an incorrect replacement OCS module. An incorrect OCS module would impair the effectiveness of the OCS, potentially failing to properly classify an adult passenger seated in the front passenger seat. This could increase the risk of injury to the occupant in a crash. Correction: Dealers will reprogram the OCS module.
Recall number
2015-210
Recall date
2015-05-15
System affected
Airbag
Model year(s) affected
2004
Manufacturer Recall Number:
Units Affected:
62,538
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This is an expansion of recalls 2013117 and 2014566.
Recall number
2015-056
Recall date
2015-02-09
System affected
Wheels
Model year(s) affected
2014 2015
Manufacturer Recall Number:
Units Affected:
80
Notification Type:
Safety Mfr
On certain vehicles, The front hub assembly bolts may not have been tightened to specification. If the bolts were to loosen, the brake caliper could separate from the wheel hub assembly, reducing braking performance and affecting vehicle stability. This could result in an accident causing injury and/or damage to property. Correction: Dealers will inspect and torque bolts to specification.
Recall number
2015-031
Recall date
2015-01-26
System affected
Other
Model year(s) affected
2013 2014
Manufacturer Recall Number:
L50 / R52
Units Affected:
15,972
Notification Type:
Safety Mfr
On certain vehicles the hood release cable assembly may have been installed incorrectly, preventing the latching claw from fully engaging. This could cause the secondary latch to remain in the open position and allow the hood to open suddenly while driving if the primary hood latch was not engaged properly or accidentally released. This could compromise the driver’s ability to see the road and its users, as well as cause damage to the windshield, which could result in a crash causing injury and/or property damage. Correction: Dealers will adjust the angle of the hood release mechanism to provide additional length to the release cable.
Recall number
2014-566
Recall date
2014-12-12
System affected
Airbag
Model year(s) affected
2003 2004
Manufacturer Recall Number:
Units Affected:
13,750
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This is an expansion of recalls 2013117 and 2014272. Vehicles that were repaired under the previous campaign are not affected because that remedy would have corrected the subject condition.
Recall number
2014-272
Recall date
2014-07-02
System affected
Airbag
Model year(s) affected
2002 2003
Manufacturer Recall Number:
R1302 (Nissan), R1303 (Infiniti)
Units Affected:
20,412
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This recall supersedes recall 2013117. Vehicles corrected as part of the previous campaign will require re-inspection and/or repair.
Recall number
2014-162
Recall date
2014-05-07
System affected
Wheels
Model year(s) affected
2014
Manufacturer Recall Number:
Units Affected:
216
Notification Type:
Safety Mfr
On some vehicles, one of the five wheel lug nuts on the right-side wheels may have been installed without being tightened to specification. This could cause the wheel(s) to become loose and separate from the vehicle, affecting vehicle handling and increasing risk of a crash causing injury and/or property damage. Correction: Dealers will verify wheel lug nut torque.
Recall number
2014-095
Recall date
2014-03-26
System affected
Powertrain
Model year(s) affected
2013
Manufacturer Recall Number:
Units Affected:
873
Notification Type:
Safety Mfr
On certain vehicles, the transmission oil cooler hose may detach due to the use of clamps with insufficient clamping force, causing transmission fluid leakage and the illumination of the malfunction indicator light in the dashboard. Continued operation in this condition could result in noise, vibration and a loss of motive power which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will affect repairs.
Recall number
2014-093
Recall date
2014-03-25
System affected
Airbag
Model year(s) affected
2013 2014
Manufacturer Recall Number:
Units Affected:
60,022
Notification Type:
Safety Mfr
On certain vehicles, the front passenger seat occupant classification system software may incorrectly classify the passenger seat as empty, when it is occupied by an adult. If this occurs, the passenger airbag would be deactivated without the illumination of the airbag warning lamp. Failure of the passenger airbag to deploy during a crash (where deployment is warranted) could increase the risk of injury to the seat occupant. Correction: Dealers will reprogram the occupant classification system.
Recall number
2013-355
Recall date
2013-10-16
System affected
Brakes
Model year(s) affected
2013 2014
Manufacturer Recall Number:
Units Affected:
13,587
Notification Type:
Safety TC
On certain vehicles, incorrect antilock braking system (ABS) calibration may result in longer than expected stopping distances during light braking on rough roads. This could potentially increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update the ABS system software.
Recall number
2013-331
Recall date
2013-09-27
System affected
Airbag
Model year(s) affected
2014
Manufacturer Recall Number:
PC243
Units Affected:
141
Notification Type:
Safety Mfr
On certain vehicles, a manufacturing defect in the dashboard could result in improper deployment of the passenger side airbag in a crash. This could increase the risk of injury to the front passenger. Correction: Dealers will replace the dashboard. Note: This affects vehicles equipped with almond colour interiors only.
Recall number
2013-118
Recall date
2013-04-12
System affected
Brakes
Model year(s) affected
2013
Manufacturer Recall Number:
PC225, PC226
Units Affected:
876
Notification Type:
Safety Mfr
On certain vehicles, the front brake caliper mounting brackets may have been manufactured incorrectly and could fail, which could result in a loss of vehicle control. This could also increase stopping distances. Both issues could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace one or both front brake caliper mounting bracket(s).
Recall number
2013-117
Recall date
2013-04-11
System affected
Airbag
Model year(s) affected
2002 2003
Manufacturer Recall Number:
R1302 (Nissan), R1303 (Infiniti)
Units Affected:
55,824
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator.
Recall number
2013-079
Recall date
2013-03-14
System affected
Airbag
Model year(s) affected
2013
Manufacturer Recall Number:
PC213 (Sentra), PC214 (Altima), PC216 (Pathfinder), PC217 (JX35)
Units Affected:
7,796
Notification Type:
Safety Mfr
On certain vehicles, sensors within the Occupant Detection System (ODS) may have been manufactured incorrectly. This may cause the system to malfunction and permanently suppress the passenger airbag. Failure of the passenger frontal airbag to deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the ODS sensors.
Recall number
2011-436
Recall date
2011-12-20
System affected
Engine
Model year(s) affected
2011
Manufacturer Recall Number:
R185 / R1115
Units Affected:
528
Notification Type:
Safety Mfr
On certain vehicles, the engine oil cooler stud (onto which the oil filter is mounted) could fail. This could cause an engine oil leak, which could illuminate the instrument panel's engine oil warning lamp. Abnormal noise and rough engine performance may also be noticed and, in the worst case, the engine could fail and stop suddenly while the vehicle is in motion. Engine failure would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the engine oil cooler connector stud.
Recall number
2011-165
Recall date
2011-04-21
System affected
Structure
Model year(s) affected
1996 1997 1998 1999 2000 2001 2002 2003 2004
Manufacturer Recall Number:
R177 & R178
Units Affected:
74,983
Notification Type:
Safety Mfr
On certain vehicles operated in areas of heavy road salt usage during winter months, a mixture of snow/water and salt may enter an assembly location hole in the upper strut housing, causing water to collect at the mating surface of the strut housing panel and the inner hood ledge assembly. Over time, this snow/water and salt intrusion may result in corrosion of the strut tower housing structure. If the vehicle continues to be driven in this condition, the strut housing may crack and pull away from the inner hood ledge assembly. Should the strut housing separate and contact the steering column upper shaft, the steering shaft could break. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect the strut housing and, if no corrosion or only minor surface corrosion is present, an anti-corrosion seal will be applied. If moderate corrosion is present, resin patches will be applied in addition to the sealant. If there is evidence of more significant corrosion, a metal reinforcement plate will be used to reinforce the strut housing assembly. In instances where it is impossible to repair the vehicle, Nissan will provide an appropriate remedy.
Recall number
2011-157
Recall date
2011-04-18
System affected
Label
Model year(s) affected
2010
Manufacturer Recall Number:
Units Affected:
2,734
Notification Type:
Inconsequential
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 110 - Tire Selection and Rims. The French-language wording displayed on the tire placard does not fully comply with the revised requirements of the Standard, which came into force on September 1, 2009. As the variation in the French text is minor, and all required safety information is displayed on the placard, no corrective recall action is required. This technical non-compliance is deemed to be non-safety related.
Recall number
2010-373
Recall date
2010-10-28
System affected
Engine
Model year(s) affected
2004 2005 2006
Manufacturer Recall Number:
R168, R169
Units Affected:
24,207
Notification Type:
Safety Mfr
On certain vehicles the Intelligent Power Distribution Module (IPDM) assembly contains an Engine Control Module (ECM) relay that has a diode for electrical current noise reduction. The ECM relay may allow silicon vapor to form and over time the silicon evaporates from the diode molding which causes silicon oxide to develop on the ECM relay contact due to arcing. In certain instances, this oxidation could cause engine performance issues (hesitation, rough engine idle, slow start/no-start condition), and engine stalling at low engine speeds which may result in a crash. Correction: Dealers will replace the Engine Control Module (ECM) relay.
Recall number
2010-301
Recall date
2010-09-08
System affected
Accessories
Model year(s) affected
2008 2009 2010
Manufacturer Recall Number:
Units Affected:
32
Notification Type:
Safety Mfr
On certain Garmin nüvi 750 GPS units purchased as a customer or dealer installed accessory at Nissan dealerships, the lithium-ion batteries may contain a defect that may cause them to overheat and cause a fire. Correction: Dealers will direct customers who have an affected unit to the Garmin Web site, which explains how to verify if their units are involved and includes procedures to follow for product exchange.
Recall number
2010-219
Recall date
2010-07-05
System affected
Airbag
Model year(s) affected
2002
Manufacturer Recall Number:
R162, R164
Units Affected:
14
Notification Type:
Safety Mfr
On certain vehicles, due to a problem during the airbag inflator manufacturing process, some front passenger airbag inflators may be missing components. If a vehicle with an affected airbag is involved in a crash where front passenger-side airbag deployment is warranted, increased internal pressure might create an irregular deployment which could increase the risk of front passenger injury. Correction: Dealers will inspect and replace the front passenger-side airbag module.
Recall number
2010-159
Recall date
2010-05-26
System affected
Suspension
Model year(s) affected
2010
Manufacturer Recall Number:
R160, R161
Units Affected:
2,759
Notification Type:
Safety Mfr
On certain vehicles, the lower control link assembly collars (forming the inboard attachment point to the chassis) may not have been manufactured correctly. If the collar weld fails, the cylindrical collar can open, which will allow the collar to slip over the mounting bolt and bushing. This may change the wheel camber, which could allow vehicle handling characteristics to deteriorate, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the lower control link assembly.
Recall number
2010-088
Recall date
2010-03-24
System affected
Powertrain
Model year(s) affected
2010
Manufacturer Recall Number:
Units Affected:
660
Notification Type:
Service Campaign Mfr
On certain four-wheel drive vehicles, the joint portion of the front driveshaft may contain small cracks. These cracks may eventually lead to a failure, resulting in separation of the front driveshaft. If the driveshaft failed while the vehicle was moving, a loud noise would be heard. If the vehicle were in 2WD mode, the driveshaft would come to rest on the frame cross-member, and the vehicle could be operated normally. The driveshaft would not come in contact with brake, steering or fuel system components, therefore the risk of a crash is considered minimal. Correction: Dealers will inspect the vehicle and replace the front driveshaft if necessary.
Recall number
2010-086
Recall date
2010-03-23
System affected
Other
Model year(s) affected
2010
Manufacturer Recall Number:
X61B
Units Affected:
111
Notification Type:
Safety Mfr
On certain vehicles, the fasteners securing the steering shaft positioning bracket may not have been tightened to the proper torque specification. If the fasteners are not properly tightened, they may loosen over time and the steering column may begin to rattle. If the condition is not repaired, the fasteners could come out completely. This may result in noticeable steering column movement, which may affect the ability to steer the vehicle, resulting in the possibility of a crash causing property damage, personal injury or death. Correction: Dealers will inspect the steering column and torque the fasteners to specification.
Recall number
2010-085
Recall date
2010-03-22
System affected
Airbag
Model year(s) affected
2010
Manufacturer Recall Number:
R156,
Units Affected:
111
Notification Type:
Safety Mfr
On certain vehicles, the fasteners securing the passenger front air bag module may not have been tightened to the proper torque specification. If the fasteners were not tightened properly, they may loosen over time and cause a rattling noise. In the event of a crash, the passenger front airbag may not deploy properly, resulting in the risk of personal injury or death. Correction: Dealers will inspect the air bag module fasteners and torque them to specification.
Recall number
2010-061
Recall date
2010-03-03
System affected
Fuel Supply
Model year(s) affected
2006 2008
Manufacturer Recall Number:
R153
Units Affected:
2,297
Notification Type:
Safety Mfr
On certain vehicles, the molded fuel tanks are slightly thinner than specification in the area under the fuel sender unit. This may allow the tank floor to deform causing the fuel sender float to interfere with other features inside the tank. This could cause the instrument panel fuel gauge to show a fuel level of approximately one quarter tank when the fuel tank is empty. An inaccurate fuel gauge can lead to engine stalling while driving, which may increase the risk of a crash causing property damage, personal injury or death. Correction: Letters will be sent to owners in two stages. The first letter will advise owners of fuel gauge inaccuracy and recommend maintaining a fuel level above the one half position. The second letter will follow, requesting owners bring their vehicles to a dealer for replacement of the fuel sender unit.
Recall number
2008-454
Recall date
2008-12-22
System affected
Airbag
Model year(s) affected
2005 2006 2007 2008 2009
Manufacturer Recall Number:
R142 / R0807
Units Affected:
27,695
Notification Type:
Safety Mfr
On certain vehicles operated in areas of heavy road salt usage, the front Crash Zone Sensor (CZS) may rust internally. This could result in the non-deployment of the driver and passenger front airbags during a vehicle crash, increasing the risk of personal injuries or death in certain crash conditions. Correction: Dealers will replace the Crash Zone Sensor.
Recall number
2007-300
Recall date
2007-09-13
System affected
Fuel Supply
Model year(s) affected
1997 1998 1999 2000 2001
Manufacturer Recall Number:
Units Affected:
45,279
Notification Type:
Safety Mfr
On certain vehicles, inadequate coating of the fuel filler tube assembly could allow water to penetrate past the coating and cause surface rust. In areas which use heavy concentrations of road salt in the winter, corrosion may occur to a degree which results in perforation of the tube. In this case, fuel leakage may occur when filling the tank or shortly thereafter. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: Dealers will replace the fuel filler tube assembly.
Recall number
2001-225
Recall date
2001-09-05
System affected
Structure
Model year(s) affected
2001
Manufacturer Recall Number:
R65
Units Affected:
3,013
Notification Type:
Safety Mfr
On certain vehicles, some of the brackets used to attach the two gas struts to the rear door (hatch) may have been improperly made. At high ambient temperatures, the increase in gas pressure in the strut(s) could cause one or both brackets to bend, resulting in the struts detaching from the bracket(s) when opening or closing the rear door. If both struts detach from the brackets, the door will rapidly fall down possibly striking someone. Correction: Dealers will replace the strut brackets.
Select Another Vehicle